Airguns

GTA
September 26, 2017, 04:02:40 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:

READ THIS:
This Is The Old GTA Forums, Which Is Now An Archive. No New Post Nor New Registrations Allowed Here.
Please Go To The NEW GTA Forums:
CLICK HERE

 
  Home   Help Search Login Register GTA Library GTA Mall
Pages: [1]   Go Down
  Print  
Author Topic: downloadable 10m targets, air pistol/air rifle  (Read 7731 times)
Larry Newman
GTA Donations
******
Offline Offline

Posts: 8


WWW Awards
« on: April 03, 2009, 05:30:59 AM »

Here are some great targets, including some scaled to 10m equiv. at 6 yards.
 http://www.tomgirling.co.uk/hobby

I plan on using the 6yd., as my basement would be 33ft, but I'd be backed up against a wall.

Thanks to Tom Girling for posting these !

I see that Walmart has 150# card stock for printing on for $5.37/150 sheets. I'll use this if the pellets tear ragged holes in my 20# printer paper.
Logged

The intensification of vision. IZH 46M.
Truman
Sr. Member
****
Offline Offline

Posts: 485


WWW Awards
« Reply #1 on: April 03, 2009, 06:55:40 AM »

Hi Larry,
 
  Welcome to the GTA. Thanks for the link, some good targets there :-) 6yds! That's real close. Hope you have a good pellet trap and glasses! I did some 9m shooting in my house for a brief spell but after a few ricochets I decided it was safer for me and my paintwork to go outside! Hope you enjoy the site and hey, The GTA is a GREAT place to be!
Logged

cuiusvis hominis est errare, nullius nisi insipientis in errore perseverare.
ac12basis
Hero Member
*****
Offline Offline

Posts: 523


WWW Awards
« Reply #2 on: April 03, 2009, 06:59:44 AM »

Larry
Try simply putting a piece of cardboard behind the target.
I shoot all the time on 20# copy paper, but I use a cardboard target backer that I tape the target to.  With wadcutter pellets, I punch reasonable holes in the target.  When the holes become ragged, that is when you either move the target to a new position on the target backer or change target backers.

Check to see that the 150# paper can work in your printer.  Some printers cannot handle paper that heavy, and you could jam or damage the printer.  Usually for paper over 100# the paper has to go STRAIGHT through the printer w/o making a bend.  To do that, some printers have a back door that the heavy paper can exit from.
Logged
Larry Newman
GTA Donations
******
Offline Offline

Posts: 8


WWW Awards
« Reply #3 on: April 03, 2009, 12:23:53 PM »

Quote
Truman - 4/3/2009  1:55 PM

Hi Larry,
 
  Welcome to the GTA. Thanks for the link, some good targets there :-) 6yds! That's real close. Hope you have a good pellet trap and glasses! I did some 9m shooting in my house for a brief spell but after a few ricochets I decided it was safer for me and my paintwork to go outside! Hope you enjoy the site and hey, The GTA is a GREAT place to be!


   I appreciate your concern. My pellet trap is 12x13", filled with 10# of electrical duct putty. Thx for the welcome...
Logged

The intensification of vision. IZH 46M.
Pages: [1]   Go Up
  Print  
 
Jump to:  

[


Powered by SMF 1.1.18 | SMF © 2013, Simple Machines
Theme by BGID
Page created in 0.053 seconds with 21 queries.