Author Topic: Crosman G-1 Extreme Trigger Assembly  (Read 9031 times)

Offline speedturtle

  • Sr. Member
  • ****
  • Posts: 376
    • http://
Crosman G-1 Extreme Trigger Assembly
« on: April 13, 2009, 07:01:50 AM »
I took an individual picture of every part of the trigger assembly and edit them on Adobe Photoshop software. I scaled them all according to their actual unit sizes.

Post your comment if I have labeled some incorrectly.

Speedturtle
Time is not important, only lessons to be learned in life. :)

Offline CharlieDaTuna

  • Hero Member
  • *****
  • Posts: 3405
    • http://www.charliedatuna.com
RE: Crosman G-1 Extreme Trigger Assembly
« Reply #1 on: April 13, 2009, 08:58:17 AM »
Hey Willie:

You kinda got it right but where is the first stage contact?   :o There isn't one.  Therefore, there is no second stage in the factory trigger, only one. :0

Even though Gamo refers to their guns having a two stage trigger, it's not really a two stage at all. It's just a long pull to get to the first stage with no perception of contact with the first stage once you get there. The fat trigger pin is not the second stage.    :)

Also, the seer not only makes contact with the piston but latches on to the piston in the piston "latching/capture" slot.

Hey.... and I ain't pickn' on ya... 8)
Bob  aka:  CharlieDaTuna
Co-founder of the GTA


HOME OF THE GRT-III TRIGGER
   Website:  http://charliedatuna.com/

Home of the NPSS-NP Triggers:  
            http://charliedatuna.com/NPSS.htm

E-Mail:  CDT22@Verizon.net

Benji-342 .177 /Brazilian Winchester 800 .22 /Gamo Cadet .177 /Gamo Shadowmatic .177 /Gamo 440 .22 /Gamo Royal .22 /Gamo Whisper .177 /Gamo SK-1 .20 /B-20 .177 /TF-99 .177 /QB-78 .177 /QB-78t .22 /QB-78-(CD) .22 /QB-78-(CJ) .22/QB-78D .22 /Crosman 2240 .22 /Cros 150 .177 /Crosman Back Packer .22 ?Crosman AS 2250 .22 /Daisy Mod 93 .177 /Marksman 2004 .177 /GS 35 .177 /FWB-124 .177 /Custom Marauder .22 /Custom Disco .177


Offline speedturtle

  • Sr. Member
  • ****
  • Posts: 376
    • http://
RE: Crosman G-1 Extreme Trigger Assembly
« Reply #2 on: April 13, 2009, 09:18:25 AM »
Actually  Charlie I did not put any note on the 1st stage of the trigger pull since I am not so sure. I believe the 1st stage is where the trigger pin is touching the intermediate lever.  When I disassemble the trigger assembly I noticed that the intermediate lever's small curves on the bottom part perfectly aligns to the trigger pin and the fat trigger pin. If there is no purpose as to why they need to put those curves on the intermediate lever then its just another waste of factory time for such a small piece of metal (unless all these parts are press-punched).

No harm done, I did not even think for a single moment that you are picking on me. Hehehe. As I have said I am quite fascinated by the way an airgun works and I'd like to know more about it. Since I have an open G-1 in front of me and I personally own it and is responsible for it I can then observe, analyze, and make an inductive reasoning as to how it works.

I decided to post it so other newbies can see how the parts inside the trigger assembly are inter-connected. My only omission on the posted image was the 2nd stage screw adjustment because I'm having a hard time taking the measurements since I'm just using some plain old ruler and a small cheap caliper. :)

Perhaps it would be very nice if someone can enlighten us as to how all these parts really works in the actual design.
Time is not important, only lessons to be learned in life. :)

Offline hvactech

  • GTA Donations
  • ******
  • Posts: 31
    • http://
RE: Crosman G-1 Extreme Trigger Assembly
« Reply #3 on: April 13, 2009, 10:41:30 AM »
I don't come close to knowing enough to discuss the technical details....but your Photoshop diagram is just plain AWESOME. -M
Born to a spell he walks the beaten path
To hell, rusty shackles of time burden his mind

Offline CharlieDaTuna

  • Hero Member
  • *****
  • Posts: 3405
    • http://www.charliedatuna.com
RE: Crosman G-1 Extreme Trigger Assembly
« Reply #4 on: April 13, 2009, 01:28:27 PM »
The first and only stage is at the fat pin contact with the intermediate lever. As the trigger is pulled, the fat pin rises up against the intermediate lever and when moved far enough, disengages the sear. All of the trigger parts are stamped out and none of it is machined and most internal parts are designed with clearance purposes in mind. Depending on what gun clone and who the manufacturer is, the intermediate levers differs. It can be Spanish, Mexican, Brazilian, Turkish or Chinese. I've even seen years ago, a two part lamination intermediate lever and sear but I don't  remember what it was in. Many of them have little differences built into them but use the same basic design and same over all functioning measurements.

However, my point  is that the fat pin does not determine the second stage....cuz there ain't no second stage.

Bob  aka:  CharlieDaTuna
Co-founder of the GTA


HOME OF THE GRT-III TRIGGER
   Website:  http://charliedatuna.com/

Home of the NPSS-NP Triggers:  
            http://charliedatuna.com/NPSS.htm

E-Mail:  CDT22@Verizon.net

Benji-342 .177 /Brazilian Winchester 800 .22 /Gamo Cadet .177 /Gamo Shadowmatic .177 /Gamo 440 .22 /Gamo Royal .22 /Gamo Whisper .177 /Gamo SK-1 .20 /B-20 .177 /TF-99 .177 /QB-78 .177 /QB-78t .22 /QB-78-(CD) .22 /QB-78-(CJ) .22/QB-78D .22 /Crosman 2240 .22 /Cros 150 .177 /Crosman Back Packer .22 ?Crosman AS 2250 .22 /Daisy Mod 93 .177 /Marksman 2004 .177 /GS 35 .177 /FWB-124 .177 /Custom Marauder .22 /Custom Disco .177


Offline tjk

  • Hero Member
  • *****
  • Posts: 2275
    • http://
Re: Crosman G-1 Extreme Trigger Assembly
« Reply #5 on: April 14, 2009, 04:41:21 AM »
Just for the hell of it,...where does the long part of the intermediate pring supposed to be located,...under the sear pin,...or under the small circular peice stamped into the trigger body (looking down from the top of the trigger body on the right side?!? tjk
397 Benji-98\' model    
Marksman  0035, My Fav!,CDT T\'d
Crosman Sierra-Pro,.177
Benji 392 08\'
CDT TT\'d RWS 34 .22,CP 4-16X40 AO
MM T\'d Marksman 0035
Crosman G1 Extreme
Daisy PowerLine 1000
TF-97 .22
B-28A MM T\'d
B-28 OEM Tuned by me
Beeman .22 RX-2 w/Theoben GR
Beeman .177 R1 Santa Rosa

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Crosman G-1 Extreme Trigger Assembly
« Reply #6 on: April 14, 2009, 09:15:08 AM »
Do you mean this one Thomas? If this is the spring you mean. It can go over top like is or under linkage.
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin