Author Topic: spare safety lever ?  (Read 4959 times)

Offline triry

  • Hero Member
  • *****
  • Posts: 844
    • http://
spare safety lever ?
« on: October 15, 2009, 05:40:59 PM »
hey guys, anyone have a spare safety lever for a qb78 ? dont ask how, but i seem to have broken the lever off.
okay, say it.....im a 'tard...lol.

Offline howie1a

  • Hero Member
  • *****
  • Posts: 994
    • http://ihowie1a@yahoo.com
Re: spare safety lever ?
« Reply #1 on: October 16, 2009, 12:02:08 AM »
What are you talking about the BOLT ?? or the safety under  and  in front of the trigger guard ??
Howie1a
CURRENT HERD ,, Baikal pistol M53 in 177 ,,crossman pistol 357 -177cal. ,,Bam 30 -22 cal,,  RWS 320 cal 177 custom walnut  stock,,QB2078 custom stock walnut cal177,,   QB2078 custom walnut stock  22 cal,,B7 custom stock cal 177 ,, B12 custom stock cal 177,,B16 from shadow 177 cal,,<< ALL THE REST OF MY  RIFLES FROM \"\"MIKE M. Flying Dragon Air Rifles \"\" Super nice.


Offline triry

  • Hero Member
  • *****
  • Posts: 844
    • http://
Re: spare safety lever ?
« Reply #2 on: October 16, 2009, 02:08:21 AM »
howard, the safety lever in front of the trigger guard......................

Offline howie1a

  • Hero Member
  • *****
  • Posts: 994
    • http://ihowie1a@yahoo.com
Re: spare safety lever ?
« Reply #3 on: October 16, 2009, 08:38:11 AM »
Why don't you check with Mike Merick Flying Dragon Air Rifles he might have one laying around or you could go to Archer Air Rifles, They both handle the QB rifles.  You might make sure it is only the safety lever and not also the spring and pin that is part of the safety assembly .Howie
Howie1a
CURRENT HERD ,, Baikal pistol M53 in 177 ,,crossman pistol 357 -177cal. ,,Bam 30 -22 cal,,  RWS 320 cal 177 custom walnut  stock,,QB2078 custom stock walnut cal177,,   QB2078 custom walnut stock  22 cal,,B7 custom stock cal 177 ,, B12 custom stock cal 177,,B16 from shadow 177 cal,,<< ALL THE REST OF MY  RIFLES FROM \"\"MIKE M. Flying Dragon Air Rifles \"\" Super nice.


Offline triry

  • Hero Member
  • *****
  • Posts: 844
    • http://
Re: spare safety lever ?
« Reply #4 on: October 16, 2009, 09:03:27 AM »
thanks howard,..on mine ( ryans ) qb, the actual lever thats used to move the rifle from safe to fire has separated from the pin that goes thru the trigger housing. at 1st, i assumed it was held in place by a small screw, after looking though, it appears to be swaged in place. i may just drill and tap it to retain the "lever".

Offline larspawn

  • Hero Member
  • *****
  • Posts: 657
    • http://
Re: spare safety lever ?
« Reply #5 on: October 16, 2009, 11:24:44 AM »
I bought one used that had the same repair.  Drilled and screwed.  Not sure if he used JBweld or something but it works.  I've punched it out several times to work on it and it still hasn't come apart.


Andy Wong aka larspawn
-----------------------------------------------
Guns:  One less than too many...

Offline triry

  • Hero Member
  • *****
  • Posts: 844
    • http://
Re: spare safety lever ?
« Reply #6 on: October 16, 2009, 11:35:13 AM »
thanks andy........i think the drill and tap method is on the to-do list.

Offline howie1a

  • Hero Member
  • *****
  • Posts: 994
    • http://ihowie1a@yahoo.com
Re: spare safety lever ?
« Reply #7 on: October 17, 2009, 12:46:08 PM »
I just looked at mine it looks like a kind of rivet could be maybe slipped back on and peaned over to form a rivet again It's just a guess since I can't see what you have. howie
Howie1a
CURRENT HERD ,, Baikal pistol M53 in 177 ,,crossman pistol 357 -177cal. ,,Bam 30 -22 cal,,  RWS 320 cal 177 custom walnut  stock,,QB2078 custom stock walnut cal177,,   QB2078 custom walnut stock  22 cal,,B7 custom stock cal 177 ,, B12 custom stock cal 177,,B16 from shadow 177 cal,,<< ALL THE REST OF MY  RIFLES FROM \"\"MIKE M. Flying Dragon Air Rifles \"\" Super nice.


Offline Jaymo

  • Hero Member
  • *****
  • Posts: 2049
    • http://
Re: spare safety lever ?
« Reply #8 on: October 24, 2009, 08:42:59 AM »
I wonder about that every time I take one apart.
15th Battalion, Mississippi Sharpshooters, CSA.

Il buono, il cattivo, ed il brutto.

\"Mmm, bacon.\"
\"Squirrel.\"
\"Mmm, squirrel.\"

Offline howie1a

  • Hero Member
  • *****
  • Posts: 994
    • http://ihowie1a@yahoo.com
Re: spare safety lever ?
« Reply #9 on: October 29, 2009, 01:02:42 AM »
I don't get into having to take the safety off every time I have to off every time I have to take the stock off the rifle I just cut a little wood from under the safety the first time I remove the stock so the stock slides over the safety and the safety can just stay in place. a little work then you are done forever. howie
Howie1a
CURRENT HERD ,, Baikal pistol M53 in 177 ,,crossman pistol 357 -177cal. ,,Bam 30 -22 cal,,  RWS 320 cal 177 custom walnut  stock,,QB2078 custom stock walnut cal177,,   QB2078 custom walnut stock  22 cal,,B7 custom stock cal 177 ,, B12 custom stock cal 177,,B16 from shadow 177 cal,,<< ALL THE REST OF MY  RIFLES FROM \"\"MIKE M. Flying Dragon Air Rifles \"\" Super nice.