| |
Hi Charlie,
My knowledge of these guns is basically on the newer T models have had
mine now for 7 months and love both. The 9 oz eagle tanks for Wallymart
World fit directly on the t variants. Seems based on your description
that you have the base powerlet models with the adapter that I think fun
supply offers with the guns or they come as an option for bulking. In
general, the 9 oz tanks can be removed with out a hitch when ever you
want on the newer t variants, like I have, that allow direct screw in of
a 9 0z tank right on the gun. Jay at airarms who can be contacted via
his URL in the beginning header of the forum, is the man to talk to on
this and he sells a slim tank that is that can perhaps direct screw in
and you can charge it with your 10 pounder and leave them on the gun,
this tank. This will alleviate clearance concerns of your moderator, I
think it is a 3 oz tank and nice and light. By the way the 9 0z tanks
don’t need any quick disconnect because they have a pin that seals when
you unscrew and remove them off your connection they just hiss for a
second when you remove them.. On the T models you leave them screw on
and discharge the gun once a few with a few shots.
Another route is to go on Cooper T’s site, they sell a kit that hooks up
on QB’s and they have an illustration on how you can with different
sized tanks. This kit will make the tank remote of the gun and you can
go to 12 and 20 oz tanks! I will send you a link shortly. Maxz bulk sell
some adapters to to allow you to connect your 9 0z. Another route to go
is to see if you can do a T upgrade, which involves cutting the stock
and and adding the threaded female to accept tanks directly. Hope this
info helps. Talk to you later.
Sincerely,
John Colo'n
International Computer Exchange
350 Camino Gardens Blvd., Ste. 101
Boca Raton, Fl 33432
Telephone: (561) 394-9188 ext.209
Fax: (561) 394-9180
email: jcolon@icesales.com
Hey John...thanks for getting back to me. I really appreciate it my
friend.
I need a little info. After reading your response to that post, ya got
me to thinkn'. Ain't that a trip.
Anyhow, I'm not real Co2 bulk knowledgeable and I have 2 QB-78's. One of
them has had the works done to it by Craig (Co2unes)...the whole nine
yards. The other is pretty much stock except that I have done some
trigger works on it and went through it doing nothing more than a lube
tune and putting in a better breech seal.
I'd like to hang a Wally Worlds 9oz. jug on the front of the stock
one and if possible also on the other one. The beefed one does have a
full length moderator on it though so that may be a problem as there is
only about 2 1/2 inches from the cap to the moderator. I do have the
bulk fill adapter on both of them now and fill from a ten pound tank. My
question is what do I need to do to hang the jug on it? or them maybe?
Also, can I fill those little tanks from my bulk tank do you know?
Perhaps you might be able to send me some pic's showing how you have
them set up and/or what it takes.
I've never messed with them before, the little add on bulk tanks that
is. Evidently you can just unscrew them from the gun when you are not
going to use them for awhile. I didn't know you could do that unless
they were discharged first. Or am I wrong about that? Anyhow, I'd like
to try it if there isn't to much involved.
If possible, perhaps I can give you a call at a time that is convenient
for you or you can call me if you like. For me, the best time is during
the day 9-6 and after 8 PM. My number is 864-967-4960. What ever is best
for you if any.
Hi Mr. Da Tuna,
Hi fellow Chinairguner. Just found a break here at work and emailing you
regarding the QB airguns. Please let me know if you need any help, just
email me back with your request.
International Computer Exchange
350 Camino Gardens Blvd., Ste. 101
Boca Raton, Fl 33432
Telephone: (561) 394-9188 ext.209
Fax: (561) 394-9180
email: jcolon@icesales.com
|
|
