GTA

General Discussion To Gateway To Airguns => Gamo Gate => : Knighticus October 29, 2006, 04:38:55 AM

: CFX - Removing the pads on the front of the stock.
: Knighticus October 29, 2006, 04:38:55 AM

What is the technique for this without tearing off the rubber heads?

: RE: CFX - Removing the pads on the front of the stock.
: daved October 29, 2006, 08:17:45 AM

Welcome aboard! Couldn't be easier, just slip a thin bladed screwdriver under the front of the pad, pry up enough to get a finger under it, and then it pops right out.

Dave

: Re: CFX - Removing the pads on the front of the stock.
: Gene_SC October 29, 2006, 09:44:20 AM

Be very careful because you can tear the rubber. CDT does allot of pad removal for tunes and I have watched him do it on my CFX's. Some are harder than others so just be careful not to tear rubber edge or leave mark on stock.

Gene

: RE: CFX - Removing the pads on the front of the stock.
: Knighticus October 29, 2006, 02:02:34 PM

Thanks. I'll give it a try in the morning.