GTA
General Discussion To Gateway To Airguns => Airgun Gate => : Sky.A November 05, 2008, 03:11:50 PM
-
Would any one know? Would like to use something a little more beefy to tighten up then the factory 2.5mm allen . So I can really cincher down
TIA
-
Be careful not to crack the stock. Best to use blue loctite on threads and cinch them down snug. I have had no problems with my Lightning fore stock bolts coming loose yet. But if they do I will use a bit of blue loctite to help hold them there. I do not recommend using loctite on stock bolts but sometimes it is a necessity. The last thing you want to happen is a crack in your hole..:)
Gene
-
Thanx for the reply Gene. Want cahnge because the hex wrench stripped its 2.5mm . Would like to up grade to the same size screw but with a hex a little larger then 2.5mm .
-
Sky, try going to your local hardware store and take one of the screws for sample and look for a new set of screws. Ace Hardware here has a great selection of metric screws with the different heads.
Best of luck
Gene
-
Hello Sky,
I have a Lightning and I am pretty sure it uses the same screws as your rifle. I have just put one of my screws against my old thread cleaning file. I reckon it is a .75mm thread they have used.
Good luck,
Alan
-
Did you end up finding some replacement screws for your lightning? I ran into the same problem stripping those little things....