GTA

General Discussion To Gateway To Airguns => Airgun Gate => : November 15, 2006, 07:41:00 AM

: 2300 has a new look
: November 15, 2006, 07:41:00 AM
This is my custom shop 2300 with a set of Rick's wonderful grips.
These are an ambidextrous design in Walnut.
They feel every bit as great as they look, and the pistol balances just about perfectly. (http:///images/happy.gif)

(http://mouse.trincoll.edu/~jonathan/airgunstuff/mypistols/custom2300/joben2300_big2.jpg)

(http://mouse.trincoll.edu/~jonathan/airgunstuff/mypistols/custom2300/joben2300_5.jpg)

(this was supposed to show the sight picture...looks like I kinda goofed. oh well.)
(http://mouse.trincoll.edu/~jonathan/airgunstuff/mypistols/custom2300/joben2300_4.jpg)

(http://mouse.trincoll.edu/~jonathan/airgunstuff/mypistols/custom2300/joben2300_2.jpg)

other info:
10.5" Crosman .177 barrel
Long Steel Breech.
Hammer Debounce Device.
LPA rear sight.
2250 fiber-optic front sight.

Valve and related springs and ports are all stock as of now.
: Odd.....
: DanoInTx November 15, 2006, 09:04:16 AM


.....looks a little bit like something I have laying aound my bedoom closet in The States.



I wonder, has Rick been visiting my clost, if so I think Rick must come out of the closet:)



Just kidding Rick, if you can hear me...no closet jokes inended.......



Take care and great looking pistol,



Dan

(http://../photos/get-photo.asp?photoid=215)






(http://../photos/get-photo.asp?photoid=214)





(http://../photos/get-photo.asp?photoid=213)







(http://../photos/get-photo.asp?photoid=216)

: Re: 2300 has a new look
: November 15, 2006, 02:32:02 PM
what  kind of guns are those?? man there look hott.
: Re: 2300 has a new look
: DanoInTx November 16, 2006, 10:59:39 PM
Crosman Custom shop 2300's.  Basically a 2240 with some options.  Joben's is sporting a beatiful set of Rick Andres grips, and mine has a set of maple/walnut grips that I made, polished steel bolt and bolt handle from Art at Arts Shack, full length brushed aluminum barrel shroud by Roy at Mountain Air, and a BSA Red Dot.  Really comfy and nice to shoot pistols....my first runner up next to my custom QB's....wish I owned 10 more:)

Dan
: Re: 2300 has a new look
: November 17, 2006, 03:45:32 AM
Wow I just priced one out, a little over $100... NOT BAD AT ALL. I might try to piece one togeather. Any caliber that would be recommended? Also is it a viable hunting handgun? Say max distance of 20-25 yards..
: Re: 2300 has a new look
: November 17, 2006, 04:34:12 PM
Well power with a 14" barrel in .22 should be a bit over 8 fpe, ~500 fps with 14 grain pellets...Hits with a pretty decent smack.
Expect about 450 with the 7.5" and somewere i the middle with the 10" of course.

Thats stock proformance mind you...If you're at all DIY inclined you can modify them for more power :D

I realy realy like these guns.
I also have a heavily modified 2250 rifle, which is basicaly the same thing.
(http://mouse.trincoll.edu/~jonathan/airgunstuff//shootingbox2.jpg)
: Re: 2300 has a new look
: November 18, 2006, 05:53:07 AM
Any sites that you can guide me to for modding these gun, diy? im fairly mechanically inclined.
: Re: 2300 has a new look
: DanoInTx November 18, 2006, 09:54:12 AM
http://www.network54.com/Realm/CFTech/CFTech.htm

and of course searching the posts on the Crosman Gate will give you good results too.

Dan