GTA

General Discussion To Gateway To Airguns => Airgun Gate => : derekmcminn November 26, 2008, 01:51:52 PM

: 1377 to 1322
: derekmcminn November 26, 2008, 01:51:52 PM

Purchased an almost brand new 1377 from the Crosman forum classifieds for $30 shipped.

Installed a spare 2250 barrel and 22 bolt guide. Installed a poly tube transfer port.
Revised the trigger to a 1-2 lb crisp pull. Painted the stock grip.
Covered the 2250 barrel with a stainless steel tube that is 12 inches long.
Installed a home made forearm pumper. Painted the stock forearm pumper and
used it as a scope rail. Installed a 12 inch shroud with a fiber optic white dot
front sight. Topped everything off with a Barska red dot.

This thing is a pure joy to walk around with in the backyard and shoot.

: Re: 1377 to 1322
: Skip November 27, 2008, 04:04:21 PM

Thats a really nice job you did. The 13XX guns are a great platform to play with, I have several and love them. That is an original way to use the pump handle it looks good.
Skip

: Re: 1377 to 1322
: Jaymo November 27, 2008, 04:22:42 PM

I like it. Now if you put the Crosman buttstock on there it would be a sweet carbine. That replacement forearm looks like it was the adjustable cheekpiece from an ATI Fiberforce stock for an AK or SKS. Darned if that wouldn't be a good replacement for the forearm on the B5-10.

: RE: 1377 to 1322
: rr_shooter November 28, 2008, 02:50:04 AM

Derek -

Looks great!  How did you attach the "old" forearm to the barrel?

: RE: 1377 to 1322
: derekmcminn November 28, 2008, 03:23:16 AM

rr_shooter - 11/28/2008  7:50 AM

Derek -

Looks great!  How did you attach the "old" forearm to the barrel?

Used a Dremel to remove some of the plastic inside, then snap fit
onto the stainless steel barrel cover, then used 2 set screws
to tighten it using the same holes that were for the roll pins.

Good way to recycle old parts and gives the gun a unique look.

I got this idea from another member here. Forgot who he is.
Maybe he'll chime in.

: Re: 1377 to 1322
: tjk November 28, 2008, 03:40:41 AM

Nice looking pistol Derek. I do have a question for you, Where did you find the trigger grip for it?  I've looked around, but not sure if I've been looking in the right place?!?!?!?!? tjk

: Re: 1377 to 1322
: derekmcminn November 28, 2008, 04:02:08 AM

tjk - 11/28/2008  8:40 AM

Nice looking pistol Derek. I do have a question for you, Where did you find the trigger grip for it?  I've looked around, but not sure if I've been looking in the right place?!?!?!?!? tjk

My girlfriend is a nurse anesthesist. That is from a rubber tubing they use
as a nasal airway. I have it in all of my guns. It makes the trigger wide
and "grippy" which is really nice.

: RE: 1377 to 1322
: miked6762 November 28, 2008, 05:24:27 AM

Gotta love the 13xx's ! Here's mine with a 24' barrel, plus tons of other goodies. I ended up going with a 2289 punp arm.

: Re: 1377 to 1322
: glyconny November 29, 2008, 01:44:11 AM

Very nice looking shooters Derek and Mike.  The modding opportunities are endless.  Here's mine (with my CB 2240).

: Re: 1377 to 1322
: glyconny November 29, 2008, 01:45:49 AM

BTW what do you think of think of the Barska red dot?

: RE: 1377 to 1322
: airgunandy November 29, 2008, 10:30:41 AM

Looking good Derek.
Nice touch with using the old forearm to mount the red dot. What kind of rail did you use?
Now you need to make a shoulder stock! :)