GTA
General Discussion To Gateway To Airguns => China Gate => : jrboon January 18, 2009, 11:58:29 AM
-
Has anyone put a Tarantula spring in a B26 and if so what was your fps with what pellet and grain.
-
There is a good chance it won't fit, most piston ID's are .770, the smaller size is .750, looks like the T spring is .786.....if you remove the sleeve in the piston it may fit but the cocking shoe will run along the coils of the spring....
-
what do you think about E3650.
-
should fit unless you have a small piston, the rear guide is approx.490 so it will be loose on the guide but some shrink wrap will fix that or a new guide...