GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : kiwi February 19, 2009, 09:56:50 AM

: Anyone know anything about these???
: kiwi February 19, 2009, 09:56:50 AM

Hi...I have come across a  used Evanix Hunting Master RS
They are the forrunner to the AR 4/5/6.
The interesting thing is they have a LONG mag that can
be packed with cotton wads & shot yer a PCP shot gun.
and can put out 85fpe
Has anyone seen or heard anything about them its about
6/7 years old.
The guy wants $600 for it  "tempting"

: Don't feel to bad
: kiwi February 20, 2009, 01:23:28 PM

Don't feel to bad..people are scratching there heads all over the net
about them...must be to only one ever built   lol
Well I have found out one thing about it..its rear

: Been a few years (like 7 or 8)
: ribbonstone February 20, 2009, 01:54:36 PM

But remember the rifles.  The current versions have a reeorked lock work to give a better double action trigger pull (and some other changes).

Here's one article (notice tht they ran it on either compressed air or co2):
http://users.htcomp.net/tbelding/AR6/AR6.html

: Close but not the same
: kiwi February 20, 2009, 03:13:15 PM

Have a good look at the mag it is 2 or 3 times
longer than a standard AR6 and has 2 air tubes

: so you can buy a Evanix vairent no one has ever seen
: redfish February 20, 2009, 11:56:51 PM

and you waste time by posting on the forum i would be ripping out the check book and speeding down the highway. anyways i emailed Evanix about it will see if they send me some info back

: RE: so you can buy a Evanix vairent no one has ever seen
: kiwi February 21, 2009, 09:20:40 AM

redfish - 2/21/2009  4:56 AM

and you waste time by posting on the forum i would be ripping out the check book and speeding down the highway. anyways i emailed Evanix about it will see if they send me some info back

Good point

: Re: Anyone know anything about these???
: redfish February 21, 2009, 11:29:40 AM

well evanix has yet to email me back but i think they are still in Korea no USA HQ.

: in The US ,
: spysir February 23, 2009, 01:44:20 AM

They were imported/sold by ARS in upstate NY untill 1999 (?) A beast that liked 42g pellets which may have been the ARS Magnum pellets. This is the workhouse the Evenix are copied from.  If you really need info or parts you might try contacting "gustoo" on gunbroker . com he still puts one up for sale every now and then.

  John

: RE: in The US ,
: kiwi February 23, 2009, 11:32:54 AM

Thanks..That more info than anyone ealse has.
42gr pellets...Think I would just buy cannon balls  lol