GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : brokenarrowjbe March 18, 2009, 02:54:38 PM

: PCP using 22xx
: brokenarrowjbe March 18, 2009, 02:54:38 PM

Converting to PCP using discovery valve in 2300/2400. Is this useful? I think the tube is to small in one of them, in the other I think it is the same as a 2250. John

: RE: PCP using 22xx
: MartinDWhite March 18, 2009, 03:06:37 PM

I did it with a 2400 (same tube as 2250, but no roll stamping). It is an awesome little carbine. More than 25 shots on a 1900 psi fill that start at 580 peak at 610 and go back to 580. that is with Beeman FTS .177 pellets.

many pics and write up on the crosman forum (link it the top left of screen)

current pics here
http://www.network54.com/Forum/275684/message/1235916205/My+PCP+2400

writeup here
http://www.network54.com/Forum/275684/message/1230761931/My+working+HPA+2400+modified+Custom+shop+carbine

Martin D. White

: RE: PCP using 22xx
: brokenarrowjbe March 18, 2009, 03:45:29 PM

Did you use the disco valve front end and fill port? And pin the valve? Thanks, JOhn

Never mind, went to second link.