GTA
General Discussion To Gateway To Airguns => Classified => : larspawn April 17, 2009, 11:54:33 PM
-
Looking for a bulk fill valve/adapter to use with paintball tanks. The kind that has a bleed valve so I can connect to a foster fitting, charge, bleed pressure and then disconnect from gun. Not looking for a remote setup. Let me know what you might want to get rid of...Thanks
-
Got mine from eBay/ I know your not looking for remote but this is the cheapest you can find instead of getting it in parts. You just need to get a brass nipple from from homedepot & shortest they have is 1 inch with hex in the middle. You need the shortest so you don't waste too much co2 when disconnecting. At first I don't really like the idea of the remote but after I added up cost if bought separately this is way cheaper and if you do or towards low side on co2 on your tank, it's best to use remote for you cannot get full fill on your AG.
$23.74 with slide
http://cgi.ebay.com/New-HEAVY-DUTY-COILED-REMOTE-W-Slide-Check-QD_W0QQitemZ330323243191QQihZ014QQcategoryZ83044QQssPageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
-
Thanks. But even if I remove the hose and have just a stub to the foster on the rifle won't it be hard to remove the quick connect because it is still under pressure? That's why I thought I would like a bleed valve. Today I forcefully pop off the qc fitting and you're right you waste a lot of co2. In addition I'm thinking it isn't good for the fittings and or gaskets?
-
The slide is your cut off from the Airgun. Just slide it away from AG to close it then opposite for open(charge). I get more fill using the short nipple due to minimal waste when disconnecting from my 20oz bottle. Here's how it work >> http://www.youtube.com/watch?v=2Fqtk29E-7s
-
Okay, perfect. Just what I needed. Buying now.