GTA
General Discussion To Gateway To Airguns => The Shop => : melloroadman April 27, 2009, 04:22:26 PM
-
Can any one make these inserts for me . Can not find any with a 20 mm . O.D . Would want several from about 1.5 mm - 3.5 mm I.D . If you can help it would be highly appreciated. And about how much would it cost per disk .I will not be using a metal disk just the clear so I do not know it every step is needed . Marvin
http://www.mechanicalphilosopher.com/frontsight.html
-
How about a bushing adapter to use 18 mm inserts in a 20 mm tube . Marvin
-
Marvin.lexan isnt cheap.a chunk of .093x18x24 is like 150 bucks.then add the machine "start time" 35 bucks.send me the Lexan and for every 4 i make it'll cost you 35 bucks plus shipping.
-
Do you think you could make a bushing that I could use the anschutz inserts in . Basically it would have a OD of 20 mm and a ID of 18 mm that would center the insert in the globe sight . I could draw up a set of plans . I would need a thin spacer for the front of it so the jam nut would apply pressure to the insert . A complete set of 10 inserts is $20.00 . Marvin
-
Try this link:
http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=12372&title=GLOBE%20SIGHT%20INSERTS (http://www.brownells.com/aspx/NS/store/ProductDetail.aspx?p=12372&title=GLOBE%20SIGHT%20INSERTS)
I thiink these particular one might fit:
Redfield International/Mid Tompkins - .769" (19.5mm) dia.
If not, You can get a new globe sight from:
http://www.sarcoinc.com/miscellaneous.html (http://www.sarcoinc.com/miscellaneous.html)
And scrolll down to:
Parker Hale Globe Type Front Sights - Parker Hale top of the line Globe Front Target Sights from their finest match rifle:- Large mounting lock screw
- Marked with the famous Parker Hale logo
- Anshutz size tube. 13/16" diameter rube
- With 1 insert large 5/8" I.D. globe - Retail value $40.00
- Originally used on Parker Hale MK II & International target rifles.
- Complete with dovetail base.
Introductory Price... $14.95, 3 for $39.95 PH005
Also available with a set of 10 different inserts at... $24.95 PH018
I would go ahead and get this as the inserts alone cost $20.00 plus shipping.....
Hope this helps you out Bud
-
This is a picture of the set I have and I need the front setting this high . I received the first set that A.F. sent out and quickly found out that there is a problem . After 3 calls to them they finally saw that I was right and that their sight would not except the Anschute inserts . They are suppose to be coming up with a fix . By the way this is the same sight that the edge has . Nick that did the article on my first thread e- mailed me to day and said he made two inserts for me with 1.5 mm holes so that I can enlarge if I have to . I also ordered a anschute insert to see if I can not come up with a fix for my own use with their inserts . 2 mm is not that much and may be a simple o - ring on the out side of the 18 mm will shim it true in the globe . If not I will have both inserts on hand and may be I can get some one local to make a bushing that will work . Thank you for your help and I will post the results as they come about . By the way this set up is on my condor and it gives a good check weld and excellent accuracy as well .Marvin
http://www.pyramydair.com/s/a/AirForce_Adaptive_Target_Sight_Set_Fits_Most_10-Meter_3-Position_Rifles/2236
-
Don't know if this is of any help, but scroll to the bottom of page in this link. He may ship to yo, I don't see why not.
http://www.bgaltd.co.uk/30151.html
-
Thank you . I should have a anschutz insert Thursday that will help me see if a shim will work . I have called a couple local plastic stores as well and there may be a way with them as well . Marvin