GTA
General Discussion To Gateway To Airguns => Airgun Gate => : Nicolas April 29, 2009, 09:14:11 AM
-
What is the best cleaning "detergent" to clean pellets with and that does not have harmfull fumes. Along the lines of Dawn dishwashing soap; would JoMax, Simple Green or Industrial Bleach be a better cleaning solvant.
Thanks in Advance
Nicolas
-
i like dawn because it removes the oil...... :p
-
I just finished cleaning my first batch of pellets ever. I took 500 CPHP and swirled them around gently in 8 oz. of Simple Green for about a minute. Then I transfered them back an forth using another container. Strained them out and drained the Simple Green; then I covered them with about 1oz. of org. Dawn and worked them as well for about a minute. Finally I rinsed them off with running hot water (until no suds were present). Now they are drying on a towel and just need to be dry lubed and put back in the cleaned out tin can. I went down to Auto Zone but the store att. had never herd of Gunk/Liquid Wrench Dry Lube or Slick 50 One (1) Lube. So tomarrow I need to check the bike store for KryTech. I have an aerosol can of Tri Flow here at home so I have to do some research on if it would work as lube for pellets.
-
I get my dry lube at Wall-Mart .Marvin
-
Hector over on the Dianawerk likes to use Pledge after cleaning. He claims it lengthens the time between barrel cleaning tremendously.
-
Ballistol is excellent pellet lube, and it cares for your barrel. Just the tiniest bit in a tin of pellets does wonders.