GTA

General Discussion To Gateway To Airguns => The Shop => : howie1a July 04, 2009, 06:10:07 AM

: Re carving a stock for a QB78 pics.
: howie1a July 04, 2009, 06:10:07 AM

I just got this QB78 from Mike and I thought while I am re carving the stock  thought  I would take some pictures so you can see how it's done. right now it's waiting to be varnished  12 coats to go. howie

: RE: Re carving a stock for a QB78 pics.
: Big_Bill July 04, 2009, 12:31:14 PM

Great job, and very methodical Howard !

Youknew what you wanted and went for it !

Thanks for sharing your talent with us.

Bill

: Re: Re carving a stock for a QB78 pics.
: Gene_SC July 04, 2009, 01:35:07 PM

Great eye for the curves Howie. No dought you have some good tastes. Thanks for sharing with us buddy.

: Re: Re carving a stock for a QB78 pics.
: geewhiz380 July 05, 2009, 06:18:49 AM

howie u r always doing creative stuff that comes out perfect ,u surly do awsome work.i like lookin at your work evertime i see your post i quicky open it .great work howie ..jorge from ny...

: Re: Re carving a stock for a QB78 pics.
: shadow July 05, 2009, 07:12:39 AM

Outstanding work Howie as always.:) You and wood are a match made in...the woodshop. ;) Ed

: Simply Outstanding Howie!!
: Timmyj1959@yahoo.com July 07, 2009, 07:44:37 PM

Thanks so much Buddy for all you have shared with us & all you have taught me Buddy!! Tim.

: Re: Re carving a stock for a QB78 pics.
: howie1a July 08, 2009, 05:05:00 AM

Hi Timmy you got good hands you should be able to do anything I can do just make sure to draw out what you want to do on the stock before grinding it to shape and leave the but plate on this way it is an exact fit to the stock also I've found  in the depot and low's the sanding disks for my 4 inch side wheel 100 gt. or 130 gt. works fine before I used to take a hard disk as a back up and use the 4 inch dark red disks for shaping the stocks but you needed to grind down the disk mounting nut so you could use the grinder for flush cutting we did a lot of work with this rig on wood boats. howie  PS I like your Ruger and am waiting to see  the finished pics.