GTA

General Discussion To Gateway To Airguns => Classified => : Bob Fairchild July 07, 2009, 11:33:05 AM

: WTB: Gamo Part #16190
: Bob Fairchild July 07, 2009, 11:33:05 AM

This is the male/female bolt that goes into the rear end of the compression chamber using a wrench.  Often called the Trigger Housing Unit Bolt since it must be removed to remove the trigger as a unit.  Need one, but could take more.  Any reasonable price.  Any ideas would be appreciated since it would be impossible to get one from Gamo.  I tried and they gave me the standard email about dealer/gunsmith/licensed etc.  Thanks - Bob

: RE: WTB: Gamo Part #16190
: leftcoast1 July 07, 2009, 12:50:23 PM

Try Crosman Bob. I'm not sure if the thread pitch is the same but some of the stuff will work.

: RE: WTB: Gamo Part #16190
: Bob Fairchild July 07, 2009, 02:07:45 PM

Thanks - that is probably the only way to get one.  I appreciate the help.  Bob

: RE: WTB: Gamo Part #16190
: tckhan July 08, 2009, 05:57:22 AM

I got some hard to find Gamo parts from these guys in the UK.

http://www.gunspares.co.uk/shopdisplayproducts.asp?id=24430&cat=Hunter+440#

: Re: WTB: Gamo Part #16190
: AKJC1977 August 22, 2009, 01:36:14 PM

Hey Bob, I sware I would try giving Gamo a call again. I needed a hunter 440 end cap and linkage roller. That was not listed on their site. I called them and they had both and for dirt cheap,also free shipping. The lady I spoke with said they would sell just about any part unless it was from a model that is like a new release. Sometime's it has to be ordered from Spain if it is a odd part they dont have in Florida. I have heard ya cant get anything from Gamo all over this site but that's not my experience,either they changed some policies at Gamo or some just aren't as persistent as I am?  I ordered a stock and those part's on a Monday on my lunch break and they were at my house wed at lunch time, that was just standard cheapest S&H ya could get. I was very impressed,cause I live in rural Kentucky and it alway's takes forever to recieve stuff.AKJC1977

: Re: WTB: Gamo Part #16190
: Bob Fairchild August 23, 2009, 12:42:58 AM

Thanks Guys:

I did get the corresponding part from Crosman - took less than five minute phone call and three days total in mail.  I will give Gamo another try since I have three Whispers I'm messing with and would like to keep as 'normal' as possible.  Will post some results in the next few weeks, once I can figure out how to do the pictures and all.  Appreciate all the help - it sure makes those impossible projects go alot smoother.  

Bob

: Re: WTB: Gamo Part #16190
: tjk August 23, 2009, 03:24:22 AM

Just for a future reference,..you may check out JGAirguns parts dept on their web-site. It's in the mall section of the GTA. tjk