GTA

General Discussion To Gateway To Airguns => Gamo Gate => : AKJC1977 July 26, 2009, 04:46:33 AM

: What O-RING best fits breech on Gamo,Viper???
: AKJC1977 July 26, 2009, 04:46:33 AM

Hey guys, I was wanting to ask what seal would be best for a Gamo,Viper? In the breech position. Any info on size and material best suited for durabillity and performance would be great, there is no wear on the factory one after several hundred shots but I would just like to have a few backups. Thanks AKJC1977

: Re: What O-RING best fits breech on Gamo,Viper???
: Gene_SC July 26, 2009, 10:03:39 AM

Best to use a Gamo original replacement seal. That is what I use when replacing them.

: Re: What O-RING best fits breech on Gamo,Viper???
: doc1310 July 27, 2009, 03:29:42 PM

and how do you go about getting a Gamo seal? They hardly ever answer the phone.

: Re: What O-RING best fits breech on Gamo,Viper???
: Gene_SC July 27, 2009, 03:53:05 PM

Order it online....:)

http://www.gamousa.com/family.aspx?family=Air (http://www.gamousa.com/family.aspx?family=Air) Rifle Spare Parts&familyID=47

: Re: What O-RING best fits breech on Gamo,Viper???
: doc1310 July 27, 2009, 04:36:09 PM

Thanks Gene. I'm guessing that it would be a small barrel o-ring? They have medium and large there also. I would think that the whisper family would all use the same size breech seal. Where the heck would you use a medium or large barrel seal?

Regards,

: Re: What O-RING best fits breech on Gamo,Viper???
: Gene_SC July 27, 2009, 09:28:17 PM

On Gamo's web site look for accessories then forRifle Spare Parts. Themedium size that fits the Viper Doc.

: Re: What O-RING best fits breech on Gamo,Viper???
: Westwind July 28, 2009, 05:24:14 AM

Couldn't you just go to the local hardware store and buy the same O ring? For about $.40?

: Re: What O-RING best fits breech on Gamo,Viper???
: Gene_SC July 28, 2009, 10:49:43 AM

It is not an O'Ring you see. It is about 1/4" long and sits deep in the brech block.

: Re: What O-RING best fits breech on Gamo,Viper???
: kiwi July 28, 2009, 01:22:54 PM

Use a O-ring...make a spacer to go in the bottom of the hole....
or stack a few O-rings

: Re: What O-RING best fits breech on Gamo,Viper???
: cnsjones July 29, 2009, 01:25:11 PM

Which one fits the Whisper?
Thanks

: Re: What O-RING best fits breech on Gamo,Viper???
: Gene_SC July 29, 2009, 11:46:25 PM

The medium fits the Whisper.

: Re: What O-RING best fits breech on Gamo,Viper???
: tashley July 30, 2009, 04:19:19 AM

Does the Shadow use the large?

: Re: What O-RING best fits breech on Gamo,Viper???
: gamo2hammerli July 30, 2009, 08:23:03 AM

Hey Gene, are all Gamo breech seals similar to the Viper`s.....a 1/4" longhollowed out cylinder? Or is it just in the "Shadow" line? Just curious.

: Re: What O-RING best fits breech on Gamo,Viper???
: davee1 July 30, 2009, 07:33:00 PM

My Shadow1K uses the large size as ordered from Gamo. I've replaced it once or twice. They hold up for a long time.

: Re: What O-RING best fits breech on Gamo,Viper???
: tashley July 30, 2009, 11:22:52 PM

Thanks davee.