GTA
General Discussion To Gateway To Airguns => The Shop => : kiwi August 13, 2009, 05:21:29 PM
-
After installing a GRT trig in my .177 kral..
i deside I needed one for the .22 Kral...
Well it turned up to day...
But at some stage kral have done a mod on there
trigger group...They have made the sears wider
The GRT trigg has a slot 3.2mm 1/8" wide & the sears
are now 3.7mm thick..
The .177 kral has a ser No 199 & the new .22
is no S- 13149....
But at this stage I figgered if the GRT can run with out the
trigger return spring just maybe so can the standard trigger ?
So I cut the little hair clip type spring out of the standard trigger
and reinstalled it....what a diffrents..ALOT softer..not as soft as the
GRT but not two far away from it....
Anyway no prob ..I read on Charlies site that it fits a
Remington Genesis...It just happens I have one....
So I will have a use for it....
But NO such luck...It fits but its so floppy.Tthe bear trap
dosen't work as theres no pin "could make one"
& when the safteys on pull the trigger and it flicks off....
trigger toe is to short....
Guess I will just have to buy another gun so I can use this trigger....
Pete