GTA

General Discussion To Gateway To Airguns => Gamo Gate => : mze August 29, 2009, 03:19:37 PM

: CFX Trigger Assembly
: mze August 29, 2009, 03:19:37 PM

I have removed the trigger assembly from my CFX and now need to reassemble it with a GRTIII trigger.

Can anyone kindly point me in the right direction to get a clear schematic and description to help me get the trigger group back together?

Thanks

: RE: CFX Trigger Assembly
: Big_Bill August 29, 2009, 03:57:15 PM

Hello Vincent.

Here is a complete photo assembly courtesy of CharlieDaTuna ! It can be found on his web site.

http://www.charliedatuna.com/pdfs/GRT%20III%20Trigger.pdf (http://www.charliedatuna.com/pdfs/GRT%20III%20Trigger.pdf)

If you have any problems feel free to ask !!!

Bill

: RE: CFX Trigger Assembly
: mze August 29, 2009, 04:15:34 PM

Hi Bill,

Thanks for the response. I have already got this download.

Unfortunately, I had commenced stripping the CFX for a reason other than installing the GRTIII trigger.
This resulted in my dissembling parts of the trigger group that Charlie's document does not cover.
I must now get it all back together. Hence my needing assembly information of the entire Gamo trigger group.

Vincent

: RE: CFX Trigger Assembly
: daved August 30, 2009, 05:04:09 PM

Vincent, click on the Library link at the top of the page.  Top left hand corner of the new page has several exploded diagrams in PDF format, the CFX is one of them.  You can blow it up as much as you need to, should give you the info you need.  Later.

Dave

: Re: CFX Trigger Assembly
: mze August 30, 2009, 07:29:18 PM

Thank you all for the positive and helpful responses.

I emailed Charlie who emailed back enough info for me to assemble the trigger group in 5 minutes.