GTA
PCP - HPA - C02 Gate => PCP DarkSiders Forum => : Bhawanna October 14, 2009, 05:46:49 AM
-
i am tired already of "pumping" the disco up. i have been doing some research and have decided to get a 100 cu/ft 3300 psi tank. i decided on the 100 cu/ft because i couldn't find a 80 cu/ft that would hold 3300 psi. now for the advice......i need a "GOOD" fill adapter and a micro-line for it. where do i get these and and what "kind" do i need to get ? i do not like the fill adapter that pa sells as i think the dial is too small for my old eyes and i want a bigger guage on it that has better increments.
-
Check this guy out, Joe Brancato. He can probably help you out with everything you need or answer your questions. If I ever buy a tank, I'll be giving him a call.
http://www.hamcontact.com/airgun/HoseAssembly/
Nathan
-
i have called this guy 5 times and emailed him 3 times trying to order a micro-line and he won't send me an invoice or a way to order the parts or pay him. everytime i talk to him, he says he forgot or was too busy. if that is the way he runs his business, then what will keep him from shipping the parts to me? I GAVE UP ON HIM !!
-
Roger, JDSAirman.com carries braided hoses in various lenghts. John is a good guy (so is Joe Brancato BTW) I have dealt with him number of times. I don't know if his hose prices are good, I use $6 grease gun hose from my local hardware store. Good choice with the 100cf 3300psi tank, I use the same. You get a lot good fills out of it.
Hope this helps
Chris
-
http://airhog.com/hp_fittings.htm (http://airhog.com/hp_fittings.htm)
Great guys and know their stuff!