GTA

General Discussion To Gateway To Airguns => The Shop => : kp4att October 19, 2009, 10:55:48 AM

: HELP...Blue Black removal???
: kp4att October 19, 2009, 10:55:48 AM

Hi guys I want to remove the blue black coat of the barrel of  one of my rifles. I want it in shinny aluminum metal.

Somebody knows if there is a blue black removal solution???

or what do I have to do for remove all that coat??


Please:

other than use sand paper and blue majic as I did to my RWS 48 THAT WAS HARD TO DO IT.

THANKS IN ADVANCE, GUYS.

//   GERALD

: RE: HELP...Blue Black removal???
: SDale October 19, 2009, 02:22:36 PM

You could use Brownell's Blue & Rust remover and some steel wool. YOu could also just use Green Scotchbrite scrub pads and a little oil. But when you strip the blueing off, the steel will RUST. Fairly quickly too unless it's sealed somehow.

: Re: HELP...Blue Black removal???
: Gene_SC October 19, 2009, 02:36:16 PM

Maybe a can of spray Black Rustolium Will work..:)

: RE: HELP...Blue Black removal???
: kiwi October 19, 2009, 05:52:50 PM

Battery acid...Paint it on with a brush...hose off "really well"

Will strip it clean.....


Pete