GTA

General Discussion To Gateway To Airguns => Gamo Gate => : Bentong November 02, 2009, 12:12:27 AM

: Gamo Trigger guard Material
: Bentong November 02, 2009, 12:12:27 AM

plastic or aluminum and will it fit crosman storm xt?

: RE: Gamo Trigger guard Material
: Randino November 02, 2009, 06:57:15 AM

That depends on the gun. My 220 is steel, a big cat is plastic. It depends on the model of the gun, and the year it was made. I think most of the Gamos are going toward plastic. I have no idea about the trigger guard fitting a crosman storm XT. I could take the guard off of my 220 and take some pictures and measurements  if you'd like.

Randy

: RE: Gamo Trigger guard Material
: Bentong November 02, 2009, 07:26:14 AM

This comes free shipping from Gamo and knowing their B18/19 crosman clones this might fit but can'y tell from picture. This one is exact copy on what's installed on my crosman. If you can measure distance from center of hole to c. hole and width. Thanks

: RE: Gamo Trigger guard Material
: airiscool November 02, 2009, 10:01:02 AM

Leo,

On my Whisper it's plastic. Looks very similar to the one in your  Gamo picture.

Two holes = 2-1/2 inch CtoC.
Overall length = 3-7/16 inch
Width at mounting surface = 3/4 inch.

Paul.

: Re: Gamo Trigger guard Material
: Bentong November 02, 2009, 12:04:23 PM

Paul,
Thanks for the measurements..exact fit on my AG.
Leo

: RE: Gamo Trigger guard Material
: Randino November 02, 2009, 12:18:42 PM

Ok, looks like you're all set.

Randy

: RE: Gamo Trigger guard Material
: Bentong November 02, 2009, 12:20:54 PM

Randino - 11/2/2009  8:18 PM  Ok, looks like you're all set.  Randy

Thanks..

: RE: Gamo Trigger guard Material
: airiscool November 02, 2009, 11:08:04 PM

Leo,
You're very welcome.

I didn't think to ask - is that trigger you showed listed by Gamo as a replacement for a Whisper ?

Paul.

: RE: Gamo Trigger guard Material
: Bentong November 02, 2009, 11:56:54 PM

airiscool - 11/3/2009  7:08 AM  Leo, You're very welcome.  I didn't think to ask - is that trigger you showed listed by Gamo as a replacement for a Whisper ?  Paul.

No mention on specific Gamo AG for guard replacement part. From the spec you gave this should fit your whisper. I am going to order some stuff so I'll just include this coz it's free shipping on reasonable price. I'm ordering this for my Crosman AG where It has a polished aluminum guard that was black before. Here's the link for parts >>>  http://www.gamousa.com/product.aspx?product=Air%20Rifle%20Trigger%20Guard&productID=89

 :emoticon:

: RE: Gamo Trigger guard Material
: airiscool November 03, 2009, 12:07:59 AM

Then it should work. Hope it does.

Paul.

: Re: Gamo Trigger guard Material
: triry November 04, 2009, 03:22:42 AM

oooooooooooooooooooh...!! you guys have found a replacement for the cheesy strap metal trigger guard that my b-3s have !!

: RE: Gamo Trigger guard Material
: Bentong November 18, 2009, 09:58:02 AM

Paul,

I ended up getting a trigger guard from crosman and it's aluminum. From your measurement it fits perfect. I ordered a bunch of stuff along with it and thier shipping is amazing $4. The part # B19-7-00-1, trigger guard and it only cost $2.10. This would look good on airguns with plain strap trigger guard..just need to form the wood to fit it.

Leo :D  

-- -----------------------------------------

airiscool - 11/2/2009  6:01 PM  Leo,  On my Whisper it's plastic. Looks very similar to the one in your  Gamo picture.  Two holes = 2-1/2 inch CtoC. Overall length = 3-7/16 inch Width at mounting surface = 3/4 inch.  Paul.