GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : dw33 November 20, 2009, 09:54:33 AM

: How to remove bolt?
: dw33 November 20, 2009, 09:54:33 AM

Hey, anyone know how to remove a Marauder bolt?  I just received the new one and need to put it in.

Found it, really simple.  What oil can I use on the bolt?  I have Beeman No. 5, and I have Hoppe's oil (for firearms).  Thanks.

: RE: How to remove bolt?
: robinsonmac November 20, 2009, 11:01:36 AM

There is a screw at the end of the scope rail that you loosen & a screw on the left side of the bolt slide that must be completely removed & you're done.  The lube that comes from the factory is more of a grease for metal on metal contact.

: RE: How to remove bolt?
: dw33 November 20, 2009, 11:27:35 AM

Thanks.  I found how to take it off, and finally got it all figured out - for now, lol.  What "grease" would you recommend?

: RE: How to remove bolt?
: longislandhunter November 20, 2009, 11:49:05 AM

Divers silicone grease is the stuff to use......  or,,,, you can just wipe off some of the grease from the old bolt assembly  :)

Jeff

: RE: How to remove bolt?
: dw33 November 20, 2009, 12:28:47 PM

Hey, I am going to get my scuba tank topped off tomorrow, so am I safe to assume the diver's grease will be at the shop?  Thanks.
LOL, good idea about the old bolt, but it is just a film of grease, not enough to lube the bolt I think.

: RE: How to remove bolt?
: longislandhunter November 20, 2009, 01:12:26 PM

Yup, comes in a little container.... will last you quite awhile  :)

Jeff