GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : man00 November 26, 2009, 01:50:09 PM

: Fill stations NPT connection
: man00 November 26, 2009, 01:50:09 PM

You all seen those fill stations on ebay for like 20-$40.00 range what is the standard NPT connection for the pressure gauge? 1/4"

: Re: Fill stations NPT connection
: airgunbliss November 27, 2009, 11:52:40 AM

1/8" NPT. The gauge is usually not a very good quality gauge. I replaced mine with a better one.

: Re: Fill stations NPT connection
: man00 November 27, 2009, 03:55:29 PM

airgunbliss - 11/27/2009  6:52 PM

1/8" NPT. The gauge is usually not a very good quality gauge. I replaced mine with a better one.

thanks

: Re: Fill stations NPT connection
: airgunbliss November 28, 2009, 04:52:46 AM

I have an extra 4000psi gauge for these, if you need one.

: Re: Fill stations NPT connection
: man00 November 28, 2009, 06:49:23 AM

airgunbliss - 11/28/2009  11:52 AM

I have an extra 4000psi gauge for these, if you need one.

I was looking for a bigger face plate is that what you have?

: Re: Fill stations NPT connection
: airgunbliss November 28, 2009, 08:10:17 AM

The one I have has a 1.5" face plate. It has the 1\8" NPT fitting on the back of the gauge. I'll send you one, no charge. PM me if you're interested. Merry Christmas.