GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : xschug3 December 11, 2009, 05:18:19 PM

: Another Revolution question
: xschug3 December 11, 2009, 05:18:19 PM

I've got a question regarding the blowback mechanism on a new FX Revolution. The gun came filled at 200 bar, it's now at 100 bar and I can't refill it because the 1/8" connection did not come with the FX pump that was purchased. So, it's at 100 bar and the blowback mechanism to chamber another pellet doesn't work now. I'm curious if this is because there isn't enough pressure in the gun to allow this? Does it require a minimum amount of pressure to effectively work?

I don't have the manual for the gun, and I havn't found anything online about this.

I hope someone can chime in here and give me some feedback. Thanks in advance.

: RE: Another Revolution question
: daved December 12, 2009, 04:02:32 AM

Go to AoA's web site, scroll down the left side menu to Owners Manuals, then scroll down to FX.  The Revolution manual is on the list.  Later.

Dave