GTA
PCP - HPA - C02 Gate => PCP DarkSiders Forum => : tonaka January 24, 2010, 10:23:16 AM
-
Hi guys!
My Logan hand pump is on the it's way to an end of it's life. It pumps but very often locks up and I would have to bleed the air out and start pumping again. It's been working for me for 3years now but I think it is time to fix it or replace seals.
So, can this particular pump be fixed at home by using some sort of rebiuld kit? I have heard of Hill pumps having those kits but never heard how to do it with this pump.
Any advice please?
In worse case I would have to buy new pump but if it is possible to fix this one for less money it would be nice.
Thank you
-
Has a rebuild kit for $30 Click on the FX Prices tab and scroll to the bottom of the page. Can't imagine it would be to hard to pop a few seals in it.
HTH
Nathan
-
Thank you
-
I called the Airguns of Arizona and they told me that FX pumps and Logan pumps are different and the FX rebuild kit won't work for Logan pumps.
I hope they know for sure, but anyone of you guys know if they are right?
Thank you
-
I dont know for sure, but those guys at AoA are knowledgeable. I would believe them. They've never steerd me wrong. If you cant find a repair kit, you might have to take it apart and see if you can spec the orings yourself, and hopefully theres no valves that need to be replaced.
I bought a Hill pump and a couple of rebuild kits to keep me good for a few years. I got the kits from StraightShooters. If all else fails, and you cant revive your pump, try the Hill pump. Its well built and easy to fix,basically everything you need is in those reseal kits, theres even a new valve in there in case you need it.
-
Pyramyd Air has rebuild kits for the Axsor pump. I bought my kit from Mike Melick and he got it from PA. I think they run about $21.00 US. Hope this helps.