GTA
General Discussion To Gateway To Airguns => China Gate => : Casey.Robertson February 02, 2010, 07:09:36 AM
-
Curious based on the design if we'll be able to run these on HPA bottles at all? Seems like a doing a riser breech with the new design would be basically impossible.
-
Making an adapter will be easy....remove gas tube and screw adapter in...i will have one of the prototypes here for testing later in the week...
-
MIKE ON THE NEW XS60 WILL IT TAKE A SCOPE?
AS THE QB78.
:)
-
What is the XS60C?
-
Jaymo - 2/4/2010 12:54 PM
What is the XS60C?
GOOD QUESTION..??????
-
Are there any pictures of the rifle available somewhere? Or does it look alike with QB78?
-
3rd, 4th and 5th pics in this thread:
http://www.network54.com/Forum/113813/message/1258167616/Mike%2C+here+is+your+pics
This thread talks about it in terms of its announcement at the SHOT Show:
http://www.network54.com/Forum/113813/thread/1264352813/Whats+new+from+China-------
Basically a new CO2 gun coming out of China.
-
i like the pistol
-
Thank you for the link with pictures.
Will we be able to take it apart and tinker with parts like we can do with QB78?
Also will they make the rifle like QB79 to work with AS bottles or PB bottles? Maybe it will be possible to use gas block like QB79 has and use PB bottles.
Is front muzzle break removable?
Alot of questions cuz I like the gun.
-
I think once Mike tears into one we'll know a lot more about the internals, mod potential etc.
-
I also very interested in this one. Maybe because it reminds me of the M1 carbine Uncle Sam let use a long, long time ago.
-
are they gonna carry the pistol?
-
I'm looking at the pistol too?
but wondering if the grips will fit a southpaw,
or are they Righty only?
I tryed a TF35 last year & it was hard to cock but not bad! .It was very inaccurate even at 5ft! it shot 7-10" group, & the wood was put in a vice ? guess that how they put it together.? sent back!,
:o
This one sure looks good!!
& the XS60 does look like a carbine.
(?)- how long is it ?
The new 25, looks IDL too my TF-97, in some
ways.
mine is a 22 cal leather a oil Drinker!!
even with a super tune - It is a slow /Not a hunter, at 15yrds it will shoot into a tin can not
through it! Just as I see it a good paper cutter/
coke cans& not pellet picky, thats worth allot.
-
The new rifles should be here this summer from what I was told, no firm date yet but when I find out will let everyone know. The 60 is about the same size as the QB-78. The pistol is easy to cock, don't know how accurate they will be as I haven't shot one yet, should be good as the factory is working to make each new model better...
-
so your gonna carry them?(pistol)
-
sure are...
-
Mike a Big thank you for the info on the pistols & XS60! ( but summer :( ..!!
Mike just one more thing will the XS60 take a scope ? just like the qb78?? :)
B12,117.
Quest 1000,117.
1377 carbine,117
TF97 22.
& b3-AK47 117.
-
looks like the rear sight would have to be removed but thats just what i see
-
you can scope it no problem, the rear sight is removeable if needed as is the front. The prototype I have is .22 and will bury a light 14 gr. wadcutter about 1/2 inch into a 2 X 6, haven't moved the chrony to the shop yet but will get some numbers...the barrel port is a 4mm hole so it should put out more fps than the 78. The valve is a high flow type with side cutouts. I did notice the head of the valve may need some work to improve flow but as it's a proto that could just be from what they have in stock. The valve is the same as the 78. The safety is kind of complicated but is a good design so should be a safe rifle for younger shooters. You won't need extra grub screws to hold the barrel as I can't move the barrel to the side or up and down when installed, the screws for the rear sight help hold it tight also but that might just be on this one. The only problem I found so far is this one leaks at the tube to reciever join, don't have any pipe tape and I buggered the o-ring slightly when removing it so will have to get another one and replace it...looks to be a winner ,just have to wait now to see what the production run looks like...
-
im sure it will be more than the 78 but it sounds like a better gun to start with. hows the trigger?