GTA

General Discussion To Gateway To Airguns => Gamo Gate => : redroush00 February 27, 2010, 11:03:21 AM

: GRT III installed but.....no second stage at all?
: redroush00 February 27, 2010, 11:03:21 AM

Its instant. Is there a second stage to this upgrade?

: Re: GRT III installed but.....no second stage at all?
: Gene_SC February 27, 2010, 11:25:32 AM

Did you read CDT's page on adjusting the GRT-III trigger?

: RE: GRT III installed but.....no second stage at all?
: CharlieDaTuna February 27, 2010, 11:25:39 AM

If you tried adjusting it, you probably have adjusted it outside the adjustment span. If not, back out the little Allen screw about 1/2 turn. You may need to then  adjust the slotted screw in very very slightly.  The adjustment instructions are a part of the instructions that you downloaded.

Send me an e-mail and I'll send you the separate basic adjustment instructions.

: RE: GRT III installed but.....no second stage at all?
: redroush00 February 27, 2010, 01:09:27 PM

oops...slotted screw? I took that out. Thought we were supposed to. :o

: RE: GRT III installed but.....no second stage at all?
: CharlieDaTuna February 27, 2010, 02:52:43 PM

Yes, the original slotted screw behind the trigger was supposed to be removed and there should only be one slotted screw left. The slotted one that is in the trigger... the silver one down in the hole... between the curve of the trigger and behind the little Allen screw.

: RE: GRT III installed but.....no second stage at all?
: redroush00 February 27, 2010, 11:32:09 PM

Just curious why we dont need the reuturn spring with this trigger?