GTA
General Discussion To Gateway To Airguns => The Shop => : triry March 22, 2010, 05:56:47 AM
-
hey guys, ryans ( my son the shooter) new disco has the worst trigger ive felt in a while.
im planning on doing the 3 screw mod along with a lighter trigger return spring.
my question is, what spring have you guys been using ?
thanks in advance !!
jim aka triry
-
I've just done that same mod! The spring I used was out of a retractable ball pen, you know, push the button and the tip emerges type pen! And I must say it is spot on!! Just be a little careful on the adjustment of the screw that is in front of the trigger. Too far in and the gun won't cock. Give the bolt a few back and forths while screwing it out until it catches, then screw it out another half turn to a turn to be on the safe side! You may want to cock it without a pellet and then give the gun a few taps around the stock and trigger area to make sure the gun won't accidentally fire! Good luck on the mod, it's easy to do and changes the dynamics of the disco dramatically! :)
-
TKO has a complete kit to modify a disco trigger for $14.00 http://www.tko22.com/ They also have a metal replacement trigger for it. I don't have a disco yet, but this trigger mod is the way I am going to go, when I go to the dark side. Good luck, snookman
-
i used that trigger mod and if you aren't careful you can have the gun go-off with just a bump of the stock.....its a good mod but be careful how you set the depth of the screws....