GTA
General Discussion To Gateway To Airguns => The Shop => : kp4att April 09, 2010, 12:31:24 AM
-
HI GUYS
YESTERDAY I RECEIVED A JM SPRING FOR A GAMO WHISPER VH .177. E-3650
THE PROBLEM IS THAT I CANNOT INSERT THE TRIGGER SEAR IN POSITION TO POSITION THE TRIGGER ASSEMBLY.
I SPENT LIKE 4 HOURS TRYING TO FIT IT BUT I COULD NOT DO IT.
ANY HELP TO PERFORM THIS TASK.
THANKS IN ADVANCE
/GERALD
-
Hi Gerald it is hard to understand without a picture but from my experience with installing gamo trigger is you have to hold up on the sear which is spring loaded and wants to fall down in the tube but hold up on the sear as you slide the trigger into position and the front tab of the sear should rest on the outer tube. I hope this helps.
-
Gerald... First lesson as a tuner... Have patients.. Ok, you need to use a small screwdriver to lift up the seer so it rests on top of action as you are compressing the spring. Tools that are required.....Three hands and 12 fingers?....:) Only tuners come equipped with those extra tools...:)
-
THAT IS THE PROBLEM. I WAS TRYING TO FIT IT UNDER THE TUBE. ..... DAHHHH // THANKS
-
OK .... GENE WHEN YOU SAID ON TOP OF THE ACTION.... YOU MEAN THE SEAR LEVEL ON TOP OF THE SMALLMETAL BRIDGE THAT IS LOCATED AT THE FRONT POSITION OF THE TRIGGER ASSAMBLY?
/GERALD
-
yup that be the place where she sits
-
Right where the arrow is Gerald.. Lever should rest there on top.
-
The whole tamale Gerald..:)
-
Gerald,
I keep my camera handy and take lots of pics at multiple angles every step of the way when I disassemble. You wouldn't believe, wait yes you would now, how many times it saved my bacon! Even then I will sometimes look at the pictures and still not remember how they go back together. Like Gene said you learn "forced" patience working on these buggers. I think the worst are the Chinese rifles. They have so many trigger configurations it is mind boggling!
So how is she shooting?
Andy Wong aka larspawn
P.S. I've been meaing to ask you about your Avatar. What's up with that? Who is that? Inquiring minds need to know! Hot!
-
DAHHHH..... I WAS TRYING TO PUT IT UNDER ...DAHH ... THAT IS THE REASON SO DIFFICULT.
THANKS GENE.
/GENE
-
THANKS FOR YOUR HELP SHADY816
/GERALD
-
ANDY THANKS... GENE SENT ME A PICTURE WITH THE SOLUTION.
/GERALD
-
no sweet glad i remembered that myself.
-
Has anyone ever heard of Puerto Rico?
-
PUERTO RICO IS BACK!!!! LOL!!!!
I HAVE THIS PROBLEM DUE WHEN I WAS REMOVING THE SPRING THE TRIGGER ASSAMBLY FALL OFF.... SO I DO NOT KNEW
HOW IT WAS POSITIONED, BUT...... THANKS TO YOU GUYS.... AS SOON I SAW THE PICTURE THE WORK SHOP OPENED.
THE GAMO WHISPER VH IS ALREADY TUNED AND COMPLETLY ASSAMBLED..... FINISH TIME 10:20PM
SHOOTING HARD AGAIN WITH A NEW JM SPRING AND SEAL.
THANKS GUYS.
/GERALD
-
NOW... THE RWS 48 .177 HAVE TO WAIT FOR A NEW PISTON EXCHANGE DUE THE PISTON THAT PYRAMID AIR SENT ME THE
PISTON WITH A DESCRIPTION ON TOP THE BAG FOR RWS 48 AND 52.......
BUT.... THE ROD WAS TO SHORT. YES THE SAME PHYSICAL DESIGN WAS THE SAME BUT THE ROD OF THE NEW PISTON IS TOO SHORT
OLD ROD 1 1/4 INCH LONG THE EXTERIOR PORTION AND MY RIFLE HAS A 1 9/16 INCH.
SO I HAVE TO WAIT FOR REPLACEMENT PARTS FOR THE CONCLUSION OF THE RWS 48 TUNE FINISH.
/GERALD
-
Dang Gerald, did you chew the end off that pistonshaft...:) Glad we could help Gerald... Where did you say Puerto Rico was located...:)
-
Gerald,
It might be that since you are Puerto Rico you have an emasculated 48! See here in the good old US (okay mainland) we get the bigger, badder, more powerful version. I doubt you had a 12 FPE version but it is possible you have a combination weaker spring and longer piston rod to "detune" your 48?
By the way, don't let Gene get to you. I love Puerto Rico. My favorite resort is El Conquistador. Pretty swanky! No airguns.
Andy Wong aka larspawn
-
Andy, I have to keep Gerald on his toes..:) And I keep getting Puerto Rico mixed up with Cuber... Oh! I mean Cuba...:)
-
Gene,
I don't...so close but yet so far. No Cuban cigars allowed in PR. That's why I love going to Mexico. They have no problem selling counterfeit Cuban Cigars. LOL
Andy
-
ANDY, I AM LEARNING TO TUNE AIR RIFLE AND I REALLY DO NOT KNOW OF PARTS VARIATION AND ALL THAT STUFF
BUT .... MY RWS 48 CHRONY NUMBER WITH 7.9G - 1,159 FPS AND 8.4G - 1,027 FPS /// THIS IS NOT A DETUNED VERSION.
I BOUGHT IT TO AIRGUN DEPOT 2 YEARS AGO.
AND THE CONQUISTADOR .... WAO BEUTIFUL VIEW.
DID YOU WENT IN THE BOAT TO PALOMINO ISLAND??? BECAUSE I USE TO GO THERE TO DO SCUBA DIVING AND I AM TRYING TO
FIND SOME CRAZY GUYS TO DO KITESURFING. THOSE ARE MY OTHER HOBBIES, I AM NOT PRACTICING THEM BUT I HAVE
THE EQUIPMENT READY.
/GERALD
-
DON'T TELL GENE WHERE IS PUERTO RICO ... HE KNOW IT, ALREADY. ... AHH GENE.... I AM NEXT TO CHINA!!!!
TALKING ABOUT CIGARS, I AM A CIGARS SMOKER ... AND LAST MONTH A FRIEND GAVE ME 6 ORIGINAL COHIBAS OF CUBA
THAT HE HAD FOR OVER 2 YEARS IN A HUMIDOR.... DELICIOUS GEMES THAT I SMOKED. WHY I WROTE ORIGINAL COHIBAS? BECAUSE THE
I BOUGHT AT DOMINICAN REPUBLIC A' BOX OF CIGAR OF CUBAN SEEDS COHIBAS BUT THE TASTE IS VERY DIFFERENT AND STRONGER TO
SMOKE.
I LOVE THE ZINO CIGARS and Davidoff CIGARS: 50mm or 54mm x 6 inches.
/GERALD