GTA
General Discussion To Gateway To Airguns => Crosman-Benjamin Gate => : keith2324 May 13, 2010, 02:18:28 AM
-
This has probably been posted over and over, however I cant seem to find any info.
I don't have a chrony yet but intend to get one in the future. I have been looking at the Marauder video by Paul Capello on the Pyramyd site and was wondering if anyone else has any real world testing information with the Marauder. In the video he has turned up the velocity setting 1/2 turn from factory. The high was 942, the low 929 and the average was 937 psi. Has anyone turned it up any higher than that and what kind of numbers are you getting? Thanks.
Keith.
-
There's probably a lot of good info.
http://www.network54.com/Forum/581291/
http://www.marauderairrifle.com/forum/
Nathan
-
Just keep in mind that the gun comes set from the factory for a 2500psi fill and he is using 2900psi, but he does not talk about adjusting the gun for 2900psi.
All he shows is increasing the velocity.
So you will have to adjust all 3 screws to duplicate his results, and that is tough without a chrony, unless you can find some posted settings.
Rick