GTA
PCP - HPA - C02 Gate => QB-7X Gate -W/Co2 & HPA => : July 16, 2007, 02:59:35 AM
-
i reshaped the stock, stained it with a red oak stain, put a couple coats of clear coat on it (more to come), put on a different butt pad, bipod, nicer illuminated scope, polished the two endcaps at the rear of the ag, polished the trigger, reworked the trigger sear engagement area giving me a butter smooth trigger.
mods to come, new valve (someone ruined mine :oops:), ext tube, bulking, laser, custom muzzle brake
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/861b15e5.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/92c79f4e.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/e7470e1f.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/8275d1e1.jpg
here is a writeup on the trigger mod i made
ok so here is my trigger mod for the qb78 which could be used for other air guns with relativity wider sears (read not 22xx).
first the trigger as it sits in its housing
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0114.jpg
next you open up the trigger housing and polish all the contact points on the round sear (the one that engages the hammer). bring it up to a mirror shine, my dremel made quick work of this working right up to the little blue polishing stone and then the felt one and some metal polish.
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0115.jpg
after your done that you take the other trigger out and angle the contact point that engages the sear to a knife edge, polish it to a mirror shine and your done. what this does is gives a lower amount of surface friction. add to that some molly lube on all contact points (including the pins that hold the parts in place) and you will have a trigger that is as smooth if not smoother then butter
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0118.jpg
Eric
-
your pics don't work.
-
Cut and paste them without the Img on either end. Looks good. I got lucky I bought a tuned one from a guy and he had put the thumbhole stock on it. I just haven't taken the time to refinish it. I like the trigger set up as well. Good job keep it up.
-
I couldn't get them to work either :(
Jeff
-
i reshaped the stock, stained it with a red oak stain, put a couple coats of clear coat on it (more to come), put on a different butt pad, bipod, nicer illuminated scope, polished the two endcaps at the rear of the ag, polished the trigger, reworked the trigger sear engagement area giving me a butter smooth trigger.
mods to come, new valve (someone ruined mine ops, ext tube, bulking, laser, custom muzzle brake
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/861b15e5.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/92c79f4e.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/e7470e1f.jpg
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/8275d1e1.jpg
here is a writeup on the trigger mod i made
ok so here is my trigger mod for the qb78 which could be used for other air guns with relativity wider sears (read not 22xx).
first the trigger as it sits in its housing
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0114.jpg
next you open up the trigger housing and polish all the contact points on the round sear (the one that engages the hammer). bring it up to a mirror shine, my dremel made quick work of this working right up to the little blue polishing stone and then the felt one and some metal polish.
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0115.jpg
after your done that you take the other trigger out and angle the contact point that engages the sear to a knife edge, polish it to a mirror shine and your done. what this does is gives a lower amount of surface friction. add to that some molly lube on all contact points (including the pins that hold the parts in place) and you will have a trigger that is as smooth if not smoother then butter
http://i73.photobucket.com/albums/i218/FSGTBRIGGS/DSCF0118.jpg
-
there we go, thanks for the pictures tip, first time posting on this sort of forum
-
nice job eric, looking forward to shooting it :)
-
Hi Eric
I hope you do not mind that I edited your post so everyone could see what a beautiful QB you have..:) All you need is just th url to where the pictures are and it will take care of itself and no htm codel is needed.
Thanks for sharing with us and we all will be looking forward to seeing many more posts from you with pics..:)
Gene
-
Hey Gene
thanks for fixing up my post and for the steps for posting pics,
and yeah Ron sometime this summer you and i have to get together for some plinking