GTA

PCP - HPA - C02 Gate => QB-7X Gate -W/Co2 & HPA => : SFCDenney July 22, 2007, 03:45:59 AM

: QB riser Breech????
: SFCDenney July 22, 2007, 03:45:59 AM

Wondering if anyone has a riser breech available for the QB's.  I've been looking at the risers for the Crosmans and like the look of a larger diameter barrel or a FULL length barrel shroud.  If anyone has one I have questions on accuracy without the front barrel band and if the larger diameter barrel needs the support.  I'm sure that the full length barrel shroud would also stiffen things a bunch.  Also if anyone has experience with the Crosman and a riser breech let me know where you shots are.  Does it change or vary with the temp and weather.

Thanks
SFC Denney

: RE: QB riser Breech????
: mikeiniowa July 22, 2007, 05:25:32 PM

With longer screws and a piece of 1/8 thick or thicker poly sheet you can get more lift, it should conform to the curves OK and just would need drilling for the srew holes. If you want alot more lift check with your local machine shop, sometimes if you get them interested they will do the work cheaper just to see if they can do it.