GTA

PCP - HPA - C02 Gate => QB-7X Gate -W/Co2 & HPA => : mikeiniowa October 03, 2007, 02:05:11 PM

: Check the Canadian forum........
: mikeiniowa October 03, 2007, 02:05:11 PM
There is a real slick trigger mod that makes the QB trigger into a two stage like set up, have 20 of the parts needed and have installed one, works great. I found the info on another forum, name starts with the letter Y..........
: Re: Check the Canadian forum........
: Gene_SC October 03, 2007, 02:28:27 PM
LOL Mike... It is ok to spell it out.. hehe  They have some talented members there as well..:)

Gene
: RE: Check the Canadian forum........
: jonny1o1 October 04, 2007, 06:38:18 AM
i saw that, them canadians are pretty bright, looks like an exelent mod
: RE: Check the Canadian forum........
: October 04, 2007, 06:51:09 AM
and now all I have to do is find a Canadian forum, starting with Y.... :)
: RE: Check the Canadian forum........
: JMG October 04, 2007, 08:27:00 AM


I am not sure if this is the post Mike was talking about but here (http://www.airgunforum.ca/forum/viewtopic.php?t=16273) is a link to the Canuk forum hehe.



John

: RE: Check the Canadian forum........
: October 04, 2007, 09:44:02 AM
It must be! Thanks much. Very nice idea, didnt know springplungers came in such a small size but I will have to go out and check our local hardwarestores now :)

Have been toying with the idea of putting a little notch in the sear as sort of a second stage but kinda dismissed that as being too crude. Then again, if it is not to my liking it's reversable at least once I suppose.

Dismissed for now till Im sure I cant find that plunger here :)

Elmar
: RE: Check the Canadian forum........
: mikeiniowa October 04, 2007, 01:46:08 PM
If you are just looking for one..........let me know, I have a bag full and will have the lock nuts for them in a day or so. You do have to drill the hole out with a #36 drill bit and then tap it to 6-32, not hard if you have the stuff to do it.
: RE: Check the Canadian forum........
: JMG October 04, 2007, 01:55:10 PM


Hey Mike can ya put one of those wiz bang dealy wompers on the 2 .22's for Roald and I?



John

: RE: Check the Canadian forum........
: October 05, 2007, 06:42:51 AM
Hi Mike,

Thanks for the offer. Im going to check here first. Drilling the hole should be fine, but have to see if I can get a 6-32 tapping bit.

Elmar
: RE: Check the Canadian forum........
: mikeiniowa October 07, 2007, 11:55:40 PM
Sure can no problem, solves the slam fire problem on a hair trigger also........
: RE: Check the Canadian forum........
: mikeiniowa October 07, 2007, 11:58:25 PM
You should have no problem finding a tap, if you know someone who has a set there is a good bet they have one........
: RE: Check the Canadian forum........
: Splash October 08, 2007, 02:47:04 AM
Check your local electrical supply house,or Lowes, Home Depot. They have them with 6-32& 8-32 for $10-15, or 6-32,8-32,6-24,8-24 for $15-20.
Mike
: RE: Check the Canadian forum........
: JMG October 08, 2007, 08:55:17 AM


Hehe I dunno if they have home depot's or lowes in Holland Mike.



John

: RE: Check the Canadian forum........
: Splash October 08, 2007, 09:01:28 AM
Nope probably not, but I'm sure they have an electrical supply house.
: RE: Check the Canadian forum........
: October 08, 2007, 01:58:45 PM
Hi gents,

We do have electrical supply houses here, havent gotten around to checking out one though, it's just that we are all metric here and sometimes its a bit of pain finding anything in inches.

Like alankeys for example, I have a US set in inches but those definitly arent stocked by our local version of Home Depot.
I should be able to go and have a look this weekend :)

Elmar