GTA

General Discussion To Gateway To Airguns => Gamo Gate => : preez November 03, 2007, 11:48:57 PM

: CFX o-ring
: preez November 03, 2007, 11:48:57 PM

Is there a good source for the large rotary breech o-ring? It's 20mm x 1mm. I damaged mine while removing the breech. Local hardware store search failed, as they have them too thick. Thanks for any input.

P.S. I placed a call to Gamo and they promised to send it, but I don't think I can count on it knowing their CS reputation.

Chris

: RE: CFX o-ring
: daved November 04, 2007, 12:53:43 AM

You could try McMaster-Carr: http://www.mcmaster.com/ .  Only thing is, unless you try one of the high dollar FEP encapsulaed types, you'll end up having to buy a bag of 200 :-(.  Or you could try CDT, he might have some on hand.  Good luck.

Dave

: RE: CFX o-ring
: preez November 04, 2007, 07:53:46 AM

Thanks Dave, I think they're like $8 for a pack of 100. I'll try that.

Chris

: RE: CFX o-ring update
: preez November 07, 2007, 01:06:26 AM

Just an FYI, the o-ring dimensions should be 1.5mm x 22mm. CFX still on the blocks...

Chris

: Re: CFX o-ring
: howie1a November 07, 2007, 06:00:53 AM

try a bearing shop they have all size o rimgs and you don't have to buy a whole box. I get o rings for my dive gear all the time .I even had to get one about 6 inches in dia. for a video houseing I built for scuba diving.howie