GTA
PCP - HPA - C02 Gate => Crosman Discovery Forum => : dank March 11, 2008, 12:35:52 AM
-
Even though I didn't think I really needed one I thought it might be nice but possibly would only improve it a bit from what I've read.
Got my info here;
http://www.spiralsol.com/airgunmod/1005.pdfhttp://www.spiralsol.com/airgunmod/1005.pdf
I went ahead with the full mod full polish and lube and to my surprise what a difference. in a good way!
Anyone else done this.
-
I did it to my 2260 a while back. I was happy with it. Nice improvement.
Iz
-
I did the same mod (followed the same post) a few weeks ago. After I adjted the trigger, the sear was dragging on the hammer and causing a loss of power. I reshaped the top of the sear to remove the drag and now it shoots nice. The trigger feels much nicer than stock. Then I started playing with a power adjuster. Posted a reply on the Yellow Disco forum with the results: http://www.network54.com/Forum/581291/message/1205278893/similar+results
jeff
-
I just finished mine and now i,m real happy with trigger.Ok, now ,what about a 2nd bbl band near muzzle,to cut down on wobble and i removed fill cap on mine and installed one of those rubber fostner nipple protectors,now i don,t misplace everytime i fill,it stays attached.
-
Good Idea with the nipple retainer.
I've been thinking about the 2nd band myself. hmmm?
-
Being a hunter myself,i was thinking about walking thru brush or vines and getting muzzle caught on something, and messing up my scope adj, and to stablilize barrel.The fostner protector can be had at any paintball shop.
-
Did the mod today as well.
I had a target out at 50 yards that POI keep shifting right because of the trigger.
The trigger is junk from the factory, anybody who says otherwise hasn't experienced this mod.
What a difference, all my shots are now staying centered with the x-ring and the trigger feels awesome.