GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : melloroadman July 13, 2008, 07:24:27 AM

: AIR COMPRESSORS
: melloroadman July 13, 2008, 07:24:27 AM

Looking at the electric air compressors . Has any one heard any thing about the liquid cooled air venteri that PA has . I see Bauer makes a 120 volt S 30/PB model that might interest me. At this point I am open other than I know I want electric. The down side to VENTREI that I see right off is 3000 psi . Are all 80 cf tanks that have a fill of 3000 psi about 8 X 24 inches. I am trying to keep tank size down and from the calculator at air hogs site a 80 cf tank at 3000 psi will give me about 16 top offs on the 201 and a 17cf fiber tank of 4500 psi will give me about 13 top offs and there is a big difference in tank size if all 80 cf tanks are that size which they must be . Tank size is important because all this gets to the range viva motorcycle. Marvin

: For durability, I got a Stewart Warner mil surp unit.
: 3n00n July 13, 2008, 09:43:02 AM

http://www.protecair.com/compressor/10018/ (http://www.protecair.com/compressor/10018/)

(http://www.protecair.com/compressor/10018/TN_DCP_1000181.JPG)

+

http://www.protecair.com/scuba/filtmedia.html (http://"http://www.protecair.com/scuba/filtmedia.html)

(http://www.protecair.com/pix/TN_Dcp6856.jpg)

=

(http://i165.photobucket.com/albums/u64/3n00n/shoot14.jpg)

`

Break even pointon money was at 63 fills, and I'm atabout 110 fills now.

Protec has treated me right and at this point every time Icrankit up is'bonus' above the cost of fills froma diveshop.

`

http://www.protecair.com/scuba/specials.html (http://"http://www.protecair.com/scuba/specials.html)

: Oops . . .
: 3n00n July 13, 2008, 10:02:11 AM

{edit} Forgot to mention that Protec can custombuild the Stewart Warnerwith an electric motor also. Just call and speak with them. {end edit}

: RE: Oops . . .
: melloroadman July 13, 2008, 10:12:40 AM

J thanks again and I saw that it is a option . I will call them , P.A. , and Air Hog tomorrow . Marvin