GTA
General Discussion To Gateway To Airguns => The Shop => : tjk July 28, 2008, 02:11:17 PM
-
(http://i341.photobucket.com/albums/o378/marksman_2008/FSCN0065.jpg)
(http://i341.photobucket.com/albums/o378/marksman_2008/DSCN0186.jpg)
(http://i341.photobucket.com/albums/o378/marksman_2008/DSCN0185.jpg)
(http://i341.photobucket.com/albums/o378/marksman_2008/DSCN0187.jpg)
(http://i341.photobucket.com/albums/o378/marksman_2008/FSCN0197.jpg)
Lady?? Poor thing looks like she missed the Ball. Now she's dressed for the town!!!! All the claims of lessoned recoil and better groups are really BS,...But don't she look *_*_*_*_*_*Y!!!!!! You thought jalepeno's were hot,...this little seniorita slaps hard boys!!!! LOL's tjk
PS. Finally this set-up good to go!!!
-
Oh, that looks good! I've got the front sight on my 0035 just turned upside down so as to not get in the way of the scope, but now that I see what you've done... I'm gonna do it too.
Very cool, thanks.
Parks
-
I did the same thing!!!! LMAO. To my surprise, the balance never felt much different to me than it did before. I think you'll like it too. It will slide past the last ring indentation on the barrel by about 1/2", so use a mallet and tap it on gently. The packaging was kind of lame, so you might want to touch it up some before hand. Mine had a mar on it, but nothing too noticeable.
-
ok the gun rack is full...........YOU CAN'T BUY ANYMORE GUNS~!!!!!!!!!!!!.....bull$ht!....BUILD A BIGGER RACK!!!!!!!!!!!HA!
-
tjk,
Have you gotten into the trigger assembly on that 0035? Trigger pull is so heavy on mine that I find myself checking the safety when it's off. Thinking of doing a deburr and lube. Any other ideas that might help?
Thanks,
Parks
-
Parks, A tune will help out the gun alot. The trigger on the other hand is another story. I think the trigger spring can be worked on to some degree, but CDT didn't think it would help out that much ( if memory serves me). He did file the sear a tad, and that did improve it some. Unfortunately the shear is 'laminated' so you don't have much to start with anyways. I think the thing that smoothed it out the best (after the filing and emory polish) was using the proper luberication. I believed he used the moly/30 wt. mix on it but not for certain. The more I shoot mine, the lesser the pull seems to be. Just be patient and give it time. I'd like to see a post with your rifle on it.
Roger, maybe I will get a few more, but not any time soon!!!!!! Got to eat ya know?!?!?!?!? LOL's Thomas