GTA

PCP - HPA - C02 Gate => PCP DarkSiders Forum => : August 12, 2008, 12:49:38 AM

: Gladi8or Help Required, Strip Down
: August 12, 2008, 12:49:38 AM

I am in the process of sorting out a knackered Logun Gladi8or and need to strip it in order replace the seals but can't work out how to remove the pellet probe. The probe needs to come out in order to access the rear allen screw that holds the two halves of the action together. Does anyone know how to remove the probe?

Thanks

Jon                                       

: RE: Gladi8or Help Required, Strip Down
: zgaja September 13, 2008, 03:47:31 AM

Hi,go and ask on http://www.airgunbbs.com,there is bengarzy,he servicing FX air rifles in England,he is nice guy and would be helpful. Chers

: Re: Gladi8or Help Required, Strip Down
: September 13, 2008, 05:54:55 AM

Thanks for the heads up but I am banned from the bbs as I once said what I though of TD. I have sorted it out now and done a better job than most professionals.

Thanks

Jon