GTA
PCP - HPA - C02 Gate => PCP DarkSiders Forum => : wahoowad May 17, 2010, 04:03:51 AM
-
I'm looking at a Luxfer 106cf scuba tank that is rated for 4350 psi. It come with a HP DIN valve. A local paintball place says they will fill it to 4350 for me if I provide the adapter they need. What what this cost me? I am not familiar with paintball fittings but assume he has a hose from his compressor with a fitting set to attach to 20 oz. paintball tanks. I have heard some places would not fill larger tanks but he said he would do it.
-
Hey Wad, I picked up the phone and called Atlanta Paintball.
The guy told me that paintball shops do not fill scuba tanks as a general rule.
Hope that helps you in your quest
Rick
-
Rickster - 5/17/2010 4:24 PM Hey Wad, I picked up the phone and called Atlanta Paintball. The guy told me that paintball shops do not fill scuba tanks as a general rule. Hope that helps you in your quest Rick
This paintball shop said they would if I provided the right fitting.
-
I take my fill set up and this male foster to male foster fitting I made up, to my paintball place. They fill my SCUBA tanks to 3400 psi for me no problem. All parts of my set up are rated for 4500 psi minimum.
-
The old slogan, "there are exceptions to every rule" has been proven again.
I thought the fill nipple for a paintball tank looked just like a foster male, But I don't paintball and I didn't know for sure.
Rick
-
Mate all yer need to make up is a fitting with a male
fosters fitting on one end that will screw in to the DIN
fitting/valve on the scuba tank...
Get on the net and do a seach of scuba gear makers...
Sherwood
Dacor
Oceanic
Tusa
Apollo
Mares
Persidion
etc....
What yer are looking for are the fittings/conectors for
twin tank dive set ups / manifolds..
Pete
-
kiwi - 5/18/2010 6:16 PM
Mate all yer need to make up is a fitting with a male
fosters fitting on one end that will screw in to the DIN
fitting/valve on the scuba tank...
Get on the net and do a seach of scuba gear makers...
Sherwood
Dacor
Oceanic
Tusa
Apollo
Mares
Persidion
etc....
What yer are looking for are the fittings/conectors for
twin tank dive set ups / manifolds..
Pete
just done a search....took about 5 mins.....
everything yer need is out there...
DIN... fill unit with bleed valve...
DIN...stainless steel plug....Drill & tap for fosters male conector..
DIN tank gauge....Remove gauge screw male fosters fitting in...
really its all NO big drama ....
-
These guys have what you need and I highly recommend them. It's where I go for my fittings. Nice people, fast shipping. http://www.northshorecompressor.com/parts/paintball-accessories.html