GTA
PCP - HPA - C02 Gate => PCP DarkSiders Forum => : melloroadman June 15, 2010, 07:37:24 AM
-
Changed the barrel and stricker from a .177 to a 25 caliber and heavy stricker from Anthony . Left the .177 springs in the condor valves so I can change back to .177 in 10 minutes if I want . Not after the most powerfully 25 . Want a accurate 65 yard shooter in a 10 mile a hour wind . Swaged some 38 grain bullets . PSI is 2700 on these strings . Just starting to dial the 4 tanks I have in . But I do like the shoot count and the FPS. should do what I want . Will continue to try different settings as time allows if this does not seem to work well .Marvin
-
Very nice. If I ever decide to go the .25 route I think I'll get a .25 barrel for my .22 condor. Looking forward to hearing how it performs in the field at the distances and conditions you spoke of....
Jeff
-
Started filling the tanks at home and taking them to the range . Has made some difference in energy but not much . Today I used a 2800 fill and P.W. setting of 4 . Same 38 grain bullets . Two tanks with 5 bhn and two with 10 bhn bullets . Before the wind came up I could see the 10 bhn bullets are not going to group well . Next week I will try a 2900 fill to see if I can get a little bell curve . At 2800 fill I can get 17 good shots before the poi drops off . I will also swag some 5 bhn bullets and test them and the 8 bhn bullets for accurcy if the wind is not to bad . Marvin
-
30 plus mph winds so no accuracy test were done . Upped the fill to 2900 psi P.W. 4 , 38 grain bullets . Tank 1 and 2 6.75 bhn and 3 and 4 8.5 bhn bullets . Looks like I might get 20 good shots before the poi drops off . But I need the wind to calm down . Will try a 3000 fill with no other changes next .Marvin