GTA

General Discussion To Gateway To Airguns => The Shop => : kiwi June 17, 2010, 11:33:27 PM

: Maccari seals...Gene / Charlie
: kiwi June 17, 2010, 11:33:27 PM

Hi guys.....
Will / dose the Gamo telsta seal also fit the Quest..
Don't want to pull it down till I know I have a seal that will fit..

thanks
Pete

: RE: Maccari seals...Gene / Charlie
: CharlieDaTuna June 18, 2010, 07:40:59 AM

In the past, both the Apex and Tesla seal was a good fit but I'm not sure anymore because Jim has varied/changed the seal size slightly on some of the small seals. I'm sure that the seal can be sized to the chamber if the seal is a little oversize with no trouble.

: Re: Maccari seals...Gene / Charlie
: arbantelope June 18, 2010, 11:33:11 AM

Would this twin-pack be a valid option?

"One each of the Tesla Seal and Apex small seal. They run from .995" to .1030" plus or minus."

http://www.airrifleheadquarters.com/catalog/item/251485/5499150.htm

: Re: Maccari seals...Gene / Charlie
: CharlieDaTuna June 18, 2010, 04:06:22 PM

Can't hardly miss there. Should be able to work in anything using the small seal, especially if you can size it for a custom fit.

: RE: Maccari seals...Gene / Charlie
: airiscool June 19, 2010, 12:58:30 AM

When I asked Maccari about what seal to get for my Gamo Whisper, he recommended  that "Problem solver" two seal set. With mine, the smaller seal of the two was still a snug fit.

Paul.

: Re: Maccari seals...Gene / Charlie
: airiscool June 19, 2010, 01:00:04 AM

CharlieDaTuna - 6/19/2010  12:06 AM

Can't hardly miss there. Should be able to work in anything using the small seal, especially if you can size it for a custom fit.

Bob,

Sizing the seal.
One thing I've not heard mentioned - how much over-sized, compared to compression chamber ID, should the seal be?

Paul