GTA
General Discussion To Gateway To Airguns => Airgun Gate => : Arkansas Man June 18, 2010, 07:28:34 AM
-
Hello air gun people, i could use a bit of experienced info on the mentioned rifle. I found one of these in a pawn store, for 60.00 bucks does that sound like a fair deal. The gun has no rust and is clean, the stock has a few surface scratches but nothing bad. The best part of the gun is that the barrel is straight with the action and there is virtually no barrel droop. I get 24 hours to check it out and then my money back if i choose to.
I would like to ask about the accuracy of these guns and also will the chaliedatuna trigger work in them? Are these china made guns, and how about after a tune?
Any info would be appriciated, thanks in advance. fb
-
Some were made in Turkey some in China earlier were made in Brazil. I had a Turk (Hatsan) one. Hard hitting and accurate. Got better with a bit of a tune. Parts are hard to get. Trigger won't change out. Here are a couple sites that should help.
http://webpages.charter.net/guru1/documents/index.html
http://www.network54.com/Forum/392756/
-
Well jim, it might be better that i steer clear of this rifle. must have been the cheap price that drew me in. And the fact that i was considering a rws 34 but the two stores i went to, that had the rws guns, the barrel was pointing left on the first one and right and down on the second. I really wish quality control was a bit better for airguns. thanks for the info. fb
-
You won't regret getting a Diana. There may be some sales on the T-05's once the new T-06 trigger is imported. Save your pennies and watch the classifieds.
-
Arkansas Man - 6/18/2010 4:40 PM
Well jim, it might be better that i steer clear of this rifle. must have been the cheap price that drew me in. And the fact that i was considering a rws 34 but the two stores i went to, that had the rws guns, the barrel was pointing left on the first one and right and down on the second. I really wish quality control was a bit better for airguns. thanks for the info. fb
you can always tweak the barrel where it needs to go. 10min job.