GTA

General Discussion To Gateway To Airguns => Gamo Gate => : May 11, 2007, 01:11:46 AM

: How to remove the front sight on a CFX?
: May 11, 2007, 01:11:46 AM

Does anyone know how to properly remove the front sight on a Gamo CFX?  I'm mounting a big scope and would like to get the iron sights off there.  It looks like the rear one just has a screw holding it on but I'm not sure about the front.  I'd like to leave the muzzle break on.  Thanks for any help.

: Re: How to remove the front sight on a CFX?
: Splash May 11, 2007, 01:37:42 AM

First off welcome to the forum. The top section will slide out to the side, it is held in with a dovetail, not sure if the rest will come out.HTH
Mike

: Re: How to remove the front sight on a CFX?
: Silo May 11, 2007, 01:40:26 AM

There is a tiny pin on the under side, Just push it out left to right and the whole thing comes apart (after first backing out the
grub screw on top a bit.) The inner sleeve may have to be tapped off the end of the barrel, (used a block of wood) but it's not a tight fit usually.