« previous next »
Pages: [1]   Go Down

Author Topic: Is It Air Arms Or Webley??,,,, :)  (Read 3678 times)

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
Is It Air Arms Or Webley??,,,, :)
« on: October 04, 2009, 10:47:19 AM »
Well,, I got started early this am (Crack of 10) on me Pops new Webley Tomahawk!!While the gun is flawless metalwise the stock had quite a few dings in it. Broke out the ole De Walt sander & got right to work. Within an hour or so I had her mostly stripped. MAN that stain goes DEEP!!I know De Walt LOVES me,,,, not cause I buy thier tools,,,they make a ton of $$ off of the sand paper I buy from them!! LOL!! Well,,, I know Tommy will HATE me,, but,,, this "Tommy Hawk" is no longer ambi!! I decided to lighten her up & remove the right side cheek piece since Me Pops liked what I did on his FWB!! This is SCAREY stuff Folks,,, one wrong move & I would have ruined this stock!!All went well,,,, 2 sanding belts later!! LOL!! I sure love the Air Arms look,,,,, I cant wait to get time to rip into me Marauder stock!! I hope Ya like her Pops,,,, I stuck with it all day,,,, I just came in but I got the first coat of stain/oil on it!!Im getting almost caught up now,,,, just have Erinie & Robins stocks to finish up. I will get em all done,,,,, see Ya next weekend Pops!!Timbo.
Logged

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
RE: Is It Air Arms Or Webley??,,,, :)
« Reply #1 on: October 04, 2009, 10:50:51 AM »
Getting ready for the SCAREY PART!!LOL!! All clamped down ready for the "Butcher"!!,,,,,
Logged

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
RE: Is It Air Arms Or Webley??,,,, :)
« Reply #2 on: October 04, 2009, 10:54:48 AM »
Let the "Butchering" begin!!Pic of an old man actin like he knows what he is doing!! LOL!! CAREFULL NOW!! He He!!,,,,
Logged

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
RE: Is It Air Arms Or Webley??,,,, :)
« Reply #3 on: October 04, 2009, 11:05:20 AM »
It came out "OK",,, Me sanding/ shaping skills is gettin better all the time.Man I still gots LOTS ta learn about finishing though!!I can fix it Pops!! I want to thank ALL that have trusted me by sending your stocks to me. Im sorry for the delay but I never figured I would get this busy so quick!! I should be caught up in the next few days & will begin to take in a few more to those that I have promised so.Timbo.
Logged

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #4 on: October 04, 2009, 12:18:53 PM »


Gonna be beautiful Son..:) Man it is gonna be like Christmas early here at the house next weekend..:) WOOO WEEEE can't wait to get started on dat R-9..:) If Bob comes over Timmy I will sit back and let the master tune your R-9. We will have all the good stuff for her as well..:)



Maybe we cancall her a AirWeb...:)



Pops

Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline triry

  • Hero Member
  • *****
  • Posts: 844
    • http://
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #5 on: October 04, 2009, 12:28:57 PM »
tim , buddy, you are indeed a man with a valuable talent. glad to say, that this skill may be a new venture for ya !!
Logged

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #6 on: October 04, 2009, 01:45:37 PM »
Quote
triry - 10/4/2009 8:28 PM tim , buddy, you are indeed a man with a valuable talent. glad to say, that this skill may be a new venture for ya !!
Thanks Jim!! Now,,,, I doubt I will ever make a small fortune in the stock buisness,,,, cause I aint got a fortune to begin with!!ROFLMBO!! However... I LOVE doing this & if I can figure out how to make $5 an hour at it I will be ONE HAPPY MAN!!I have plans on this,,,,,,,,,,,,,,,, Tim.
Logged

Offline Big_Bill

  • Hero Member
  • *****
  • Posts: 5615
    • http://
RE: Is It Air Arms Or Webley??,,,, :)
« Reply #7 on: October 04, 2009, 01:54:20 PM »


You do beautiful work Timmy,



But you scare the heck out of me using a belt sander that big !!!!! WOOOO !



But you seem to have the handle on it !!!



Uncle Bill

Logged
Life Member of The United States of America
Life Member of the National Rifle Association
Member Air Guns Addicted Anonymous
SHOOT SAFE ! - SHOOT WELL ! - SHOOT OFTEN !
Always Use A Spring Compressor ! and Buy the GREAT GRT-III & CBR Triggers, cause they are GRRRREAT !

Offline gamo2hammerli

  • Hero Member
  • *****
  • Posts: 6261
    • http://
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #8 on: October 05, 2009, 02:45:53 AM »
Wow...that's beautiful work.  Sure looks like hard work too.....all bent over like that.
Logged
Gamo: Expotec .177 + Big Cat .177 + Viper .177 + Whisper .177, Hammerli Titan .177, Diana model 24 .177, RWS-Diana P5 Magnum pistol .177, Crosman: G1 Extreme .177 + Storm XT .177 + Sierra Pro .177 + 1377 pistol .177, Air Arms S410SL .22, BSA Scorpion T10 .22, FX Cyclone .177, Remington Air Master 77 .177 + BB\'s,

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
Im Getting Closer!! :)
« Reply #9 on: October 05, 2009, 08:10:26 AM »
Well,,, it,s raining like heck here today so I moved out to the picnic shed to try & get a lil bit done. The 34 Pro Compact is all done & put back together with me secret teflon tape on dem screws!!Man does this PC shoulder nice,,, I really like feel/balance & man dem dere Morgan pads are NICE!! I sure hope I dont forget & leave it here when I head up to Pop,s place this weekend!!He He!! The FWB is nearly done,, I think 2 more coats of toung oil/2 mre days & she will be looking good. The Webley will need at least 3 more coats. All 3 are nice shooters,,,,,, maybe I will cancel my travel plans & just keep em all!!Who am I kidding,,,Everyone knows how bad I want an R-9,,,,, Me Pop,s gots me one in 20 cal. waiting on me!!See Ya this weekend Pop,s,, hopefully I will have these done & Ernies too. Hope Ya dont mind if I bring my tools as I may not finish Ernies & Robins before I leave. Tim.
Logged

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
RE: Is It Air Arms Or Webley??,,,, :)
« Reply #10 on: October 05, 2009, 08:13:08 AM »
Nuther pic. Sorry Folks,,,, I only know how to post one pic at a time!!Tim.
Logged

Offline Gene_SC

  • Hero Member
  • *****
  • Posts: 11378
    • http://www.airguntoys.com
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #11 on: October 05, 2009, 08:33:27 AM »
WOW, Timmy, they just keep getting more beautiful...:) Your Killing me Son..:) I wish the weekend would hurry up and get here..
Logged
THE ONES I SLEEP WITH: BSA Lightning XL, AA TX-200, AA ProSport, BSA Ultra, HW-97K, Crosman NPSS .177, FX Cyclone, HW-30 Nicle Plated, AA-S200, Crosman Marauder, CZ-634, R-9 DG, Webley/Scott UK Tomahawk, Benji Kantana, Benji Marauder, Benji Discovery.....
....

Gene\'s Tunz n Toyz
Springer Tunin

Offline Timmyj1959@yahoo.com

  • Hero Member
  • *****
  • Posts: 3716
    • http://dragonslayer
All Tucked In For The Night,, :)
« Reply #12 on: October 05, 2009, 09:30:23 AM »
Gots em all snuggled in for the night on the ole pool table!! Most of me own guns are stacked like cordwood over in the corner!!All safe and sound inside warm & dry,,,,,, it rained ALL day here today!!Timbo.
Logged

Offline geewhiz380

  • Hero Member
  • *****
  • Posts: 1878
    • http://
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #13 on: October 06, 2009, 06:49:23 AM »
timmy and gene im sending u my action cause i didnt want to take anything else apart cause im a not to smart of a person ,however i sent u a scope nc star 4x30 that i dont use and its three months old i have three rifles and one scope that i use on the magnum which is a tasco 3-9x40 which works fine since i shoot 40 yds and better. my b26and shark.25cal have to wait till next year cause i have back up bills i have never been in this situation but thanks to u ,gene,mikemelick,george from sunshine,and many others that gave me concern i wouldnt have jack and im so ,so happy to know such a crowd as the airgun forum ...it leaves tommorrow to s.c.take your time cause u have more work in front of u but im gonna love my new 350m.22 keep the brake thats in front timmy cause my neighbor made it fit and groups fine .i,ll send u the numbers from ups by 3pm but its being sent at 11am thank u .GOD BLESS US ALL ..from a friend jorge lopez nys..
Logged

Offline Jaymo

  • Hero Member
  • *****
  • Posts: 2049
    • http://
Re: Is It Air Arms Or Webley??,,,, :)
« Reply #14 on: October 06, 2009, 02:30:11 PM »
I like yer work, sir. I'm glad I'm not the only tung oil fan here. My first stock job was refinishing a Chinese SKS stock. Night and day difference. Off with the orange goop and on with 10 coats of tung oil. That Chinese beech stock went from bland and soft to beautiful and hard. One of the things I like so much about tung oil is the fact that it polymerizes in the wood and actually hardens it. I have a Mossberg .22 stock I'm refinishing that I'm going to finish with tung oil if I ever get around to it.

Have you ever used teak oil? I've been wanting to use it but don't know how it compares to tung.

I salute you for being able to use the belt sander and not ugly up the stock. For me, a belt sander is the quickest way to turn a minor refinishing  job into a major repair job.
Logged
15th Battalion, Mississippi Sharpshooters, CSA.

Il buono, il cattivo, ed il brutto.

\"Mmm, bacon.\"
\"Squirrel.\"
\"Mmm, squirrel.\"
Pages: [1]   Go Up
« previous next »