It seems that a

[CharlieDaTuna]

moderator on the YP's is still continuously deleting any posts that make reference to me or the GRT-III triggers. A fellow member here apparently put a post up over there and again, it seems to have disappeared.... as usual. Par for the course.

There is still absolutely no respect for me or for those that post regarding me or the GTX-III Trigger or any reference to me. I can accept that a few over there may have no respect and that's their personal problem but they should at least have respect for others opinions, but they don't. In my opinion, those that have no respect should get no respect.

So........ my attitude about a few things are about to change... I can feel it coming...

Over the past six or seven months (and as late as yesterday), I have been gotten many requests and orders ever since I stopped manufacturing and marketing for the late model production SuperSear that I discontinued last June. It has been suggested by many that I should start marketing the late production SuperSear for the Benji 392/397 and some other like guns again.

 Up until now, I have not done it in consideration for some on the YP's but now I'm reconsidering it. There may be other past items brought back to life also. It's just a matter of discussing it with my maunufacture to determine if they are willing to produce them and at what cost. An announcement may be made in the near future.

Your thoughts
   

[shadow]

Sounds like the same old KGB over there. Ed

Do it Charlie! Pardon my french, but " To hell with those ***holes at the "Trailer Trash" Forum". I was banned from there for "taking the wrong side with out knowing the facts" (their words) in this whole fiasco. I really got into it with the 2 Steves, among others. As far as I'm concerned, I know who and what NC is all about, so there was no question about who I was gonna' support. Do what you gotta' do, and if it *_*_*_*_*_*es them off, then you're doing something right!

Danny

[DanoInTx]

If you remade the 22XX sear I would put a check for 2 in the mail today.  I want a couple really bad, unfortunately certain people make purchasing one go against my beliefs.  I bet it could even be improved a little:)

Dan

[CharlieDaTuna]

sure making it easier to make the decision.

BOB GIVE THEM HELL.YOUR HOME AND WE'RE ALL BEHIND YOU......John in Ohi.

[shadow]

We got your back Bob , I'll get a posse together, you get started on dem part's and we'll go out with our guns a blazing. Ed

[jejones1]

All,

I'm relative new to both forums... though a longtime airgunner going back to my teenage days with sheridans and ground squirrles with my father.  I believe in my excitement about the GRT-III trigger started this mess again and I apologize as I was unaware of the history.  I have enjoyed good advice and met a few good men in each forum and what we don't need is turf war. Should we all take the high ground and as long as legal and ethically from a business standpoint offer products and services without censorship or name calling.  Ultimately the general populous will see each forum for what it is or becomes regardless of family history.(Can't we all just get along??)  NOT to make light of history I am unaware of.

Just me 2 cents.

Jeff

[Big_Bill]

Hi Charlie, Bob,

Now that you have obtained international acclaim, I do not believe that the little minds, and very little nuts, of these unskilled  wipes, will have any further effects on your talents and creative designs, and I doubt that they ever have had any effects on you or your creation.

I would not doubt, that they will be forced to acknowledge your amazing creation and development of the GTX-III trigger, and concede accolades to the GTX-III's GREATNESS ! Or they will fall aside.

As you may recall, I found this Great Forum as I searched for a solution for the Gamo's very. very poor trigger, and I still do not know this other party, so they cannot have any control over the internet or those that seek the best trigger I have ever seen !

Charlie Ubber Allis !

They need you, much more than you need them ! Hell, they need your triggers just as much as I did !

Only the BEST Charlie,

Bill

[CharlieDaTuna]

the guys on the YP's are great guys. Hey..and not to worry my friend, you didn't start anything. And neither is it a turf war. It's just that there are a couple whose goals are to destroy or impair me in any way possible.

i'm completly innorant to whats going on I don't even know the other web site.  what makes it wrong is the fact by all accounts CDT seems to be a very skilled and loved bussines man and acess to his services and help should not be blocked by someone that doesnt like him.
I hope this is'nt an american web-site,  they should have heard of a little thing called freedom of speech!!!!!!

George

[CharlieDaTuna]

I've gotten about a dozen e-mails wanting to order the SuperSear since I've put this post up yesterday afternoon and I thank you for the enthusiasm, the orders and your support.

And yes, the SuperSear is a fantastic improvement mod for the Benji trigger (it does for the Benji what the GRT-III does for the Gamo), however, I haven't determined whether or not I'm going to start them up again. So... at this point, please don't order the SuperSear. As I said, I just wanted to get a feel for the "atmosphere". I will make a post if I decide to go ahead with it and it will also be back up on the website again.

In addition, if I go with it, it will be a couple of weeks or so after deciding, to build the new program for the CNC equipment (it's a pretty precision made piece) and get it set up to start the run as well as the heat treatment afterwards. If I do decide to proceed, I'll probably set up a pre-order list as I have done in the past.

Ain't this a great place to be.... thanks guys

[Big_Bill]

Well Charlie,

If that there Sear will do for my  Sheridan C-series what your GRT-III did for my 890S, you bet I want one!

here's hoping you go into production Charlie.

I don't know how you do it, and I don't understand why they work either ?

BUT THEY DO WORK, the GRT-III that is...

Bill