« previous next »
Pages: [1]   Go Down

Author Topic: Fill stations NPT connection  (Read 1804 times)

Offline man00

  • Full Member
  • ***
  • Posts: 107
    • http://
Fill stations NPT connection
« on: November 26, 2009, 01:50:09 PM »
You all seen those fill stations on ebay for like 20-$40.00 range what is the standard NPT connection for the pressure gauge? 1/4"
Logged

Offline airgunbliss

  • GTA Donations
  • ******
  • Posts: 26
    • http://
Re: Fill stations NPT connection
« Reply #1 on: November 27, 2009, 11:52:40 AM »
1/8" NPT. The gauge is usually not a very good quality gauge. I replaced mine with a better one.
Logged

Offline man00

  • Full Member
  • ***
  • Posts: 107
    • http://
Re: Fill stations NPT connection
« Reply #2 on: November 27, 2009, 03:55:29 PM »
Quote
airgunbliss - 11/27/2009  6:52 PM

1/8" NPT. The gauge is usually not a very good quality gauge. I replaced mine with a better one.

thanks
Logged

Offline airgunbliss

  • GTA Donations
  • ******
  • Posts: 26
    • http://
Re: Fill stations NPT connection
« Reply #3 on: November 28, 2009, 04:52:46 AM »
I have an extra 4000psi gauge for these, if you need one.
Logged

Offline man00

  • Full Member
  • ***
  • Posts: 107
    • http://
Re: Fill stations NPT connection
« Reply #4 on: November 28, 2009, 06:49:23 AM »
Quote
airgunbliss - 11/28/2009  11:52 AM

I have an extra 4000psi gauge for these, if you need one.

I was looking for a bigger face plate is that what you have?
Logged

Offline airgunbliss

  • GTA Donations
  • ******
  • Posts: 26
    • http://
Re: Fill stations NPT connection
« Reply #5 on: November 28, 2009, 08:10:17 AM »
The one I have has a 1.5" face plate. It has the 1\8" NPT fitting on the back of the gauge. I'll send you one, no charge. PM me if you're interested. Merry Christmas.
Logged
Pages: [1]   Go Up
« previous next »