it's 11.00 so my med's may kick my *** before I get this down?
HERE'S A BIG THANK YOU TOO ALL WHO HELPED ME WITH MY FIRST TUNE JOB,
& THANKS TOO MIKE FOR GETTING ME OUT OF A HOLE I DUG!
THERE IS A START, WENT BY THE POSTING FOR TUNING A B3-AK47. SO LIKE HE SAID THE SPRING IN NOT UNDER A LOT OF FORCE!
SO THAT CAME RIGHT OUT , NEXT THE TRIGGER & SPRING REMOVED, (NOTE) DON'T CUT THE SPRING! i GOT A HONE FROM hARBOR FT, & THAT WORKED
OUT OK JUST ALLOT OF HONING ON IT THE CHAMBER, & USED 300/ 600 WET SAND PAPER ON ALL SHARP PARTS.
I ORDERED THR KIT FROM SOUTH SUMMIT, & CAME THE NEXT DAY!! PUT THE SPRING THAT WAS ABOUT 4" LONGER THEN THE Org ONE,
BUT THAT SHOT HARD & LOUD, AFTER 4-5 SHOTS THE BARREL CAME LOOSE, AND TOOK HER APART AGAIN ,& THE PIN WAS BENT & THE BARREL HAD
MOVED ABOUT 1/8 " OUT. SO DRILLED A BIGGER PIN & WITH METAL WELD PUT IT BACK , & PUT HER BACK / BUT THE FRONT STOCK WAS CRACKED,
SO I PUT SOME E-6000 GLUE ON IT. ALSO USED E-6000 ON THE PINS TO HOLD THEM IN.
AS FOR THE STOCK I PUT A 2X4 ON IT & CUT IT TOO FIT ME ! AS YOU KNOW THE SIGHT ARE BAD SO I CUT THEM OFF, & GLUED DOWN THE RAIL
& PUT A 4X32 SCOPE ON IT, WORKS GOOD & ACCURATE BETTER THEN THE QUEST EVER WAS,
BUT THIS WOULD NOT HAVE BEEN POSSIBLE WITH OUT MIKE SENDING ME THE PARTS I MESSED UP!
BIG THANKS TOO MIKE, AND TOO ALL WHO HELP IN THIS ONE..
REGARDS
RON
