PISTON INSTALL LUBE

Can I use Ace Pure Silicone Lubricant(airisol) when istalling my piston? Or does it need to have that Teflon base in it?

[SDale]

You can use the Acce lube. Just use it sparingly. If it's the spray on stuff, I'd let it sit & dry for a couple hours before reassembling. If it's the grease/paste type then a small Pea Sized drop is MORE than enough to get the job done.

I usually use either DOW Corning 111 pure silicone grease or CRC Dielectric grease depending on what I have on hand at the time. DOW Corning also has a 100% Silicone Mold Release Agent similar to 111, but ALLOT thinner. I've had the best luck with it in the past compared to the other 2.