« previous next »
Pages: [1]   Go Down

Author Topic: Benji Triggers!!  (Read 3616 times)

Offline tjk

  • Hero Member
  • *****
  • Posts: 2275
    • http://
Benji Triggers!!
« on: December 12, 2008, 01:10:46 AM »


I would like to lessen the pull on my Benji pumpers, but would like to try to do it myself instead of sending it off to a tuner. Is there anything that the DIY'r can do to remedy this. I'm not looking for a match hair trigger by any means, but the GRT-III trigger has spoiled me, and I miss shooting my pumpers, butbecause I get PO'd with the harder trigger-pull on these guns, they end up being put back on the rack!!!! Any advice?!?!?!?!?! Threads with picture's, etc!?!?!?!? Thanks, tjk

Logged
397 Benji-98\' model    
Marksman  0035, My Fav!,CDT T\'d
Crosman Sierra-Pro,.177
Benji 392 08\'
CDT TT\'d RWS 34 .22,CP 4-16X40 AO
MM T\'d Marksman 0035
Crosman G1 Extreme
Daisy PowerLine 1000
TF-97 .22
B-28A MM T\'d
B-28 OEM Tuned by me
Beeman .22 RX-2 w/Theoben GR
Beeman .177 R1 Santa Rosa

Offline dave2288

  • Hero Member
  • *****
  • Posts: 1031
    • http://
Re: Benji Triggers!!
« Reply #1 on: December 12, 2008, 05:48:02 AM »
biged's supersear
Logged
Dave

g1 extreme(turbo tuned cdt trigger, choker muzzle break and fix hinge), powerline 1000s(lube tuned...soon to get a makeover), benjamin ss .22 tuned and shortened, patriot .25(british)

Offline airgunandy

  • Hero Member
  • *****
  • Posts: 819
    • http://
RE: Benji Triggers!!
« Reply #2 on: December 12, 2008, 12:20:00 PM »
Check this out....

http://www.airgunsmith.com/392/triggertune.htm

I did some of this (no bearings on my trigger!) and it helped a lot.
Polished the sear face and the hammer and applied some synthetic grease with moly.

Logged

Offline tjk

  • Hero Member
  • *****
  • Posts: 2275
    • http://
Re: Benji Triggers!!
« Reply #3 on: December 12, 2008, 03:09:02 PM »
Thanks for the thread Andy. Looks like something an idiot like me could do!!!!! I'll try that on my 392 first, and if I don't mess it up, I'll try it on my 'old reliable' 397. That's what I needed though,....pictures!!!!!!!! lol's Thanks again, tjk
Logged
397 Benji-98\' model    
Marksman  0035, My Fav!,CDT T\'d
Crosman Sierra-Pro,.177
Benji 392 08\'
CDT TT\'d RWS 34 .22,CP 4-16X40 AO
MM T\'d Marksman 0035
Crosman G1 Extreme
Daisy PowerLine 1000
TF-97 .22
B-28A MM T\'d
B-28 OEM Tuned by me
Beeman .22 RX-2 w/Theoben GR
Beeman .177 R1 Santa Rosa

Offline tjk

  • Hero Member
  • *****
  • Posts: 2275
    • http://
Re: Benji Triggers!!
« Reply #4 on: December 13, 2008, 02:45:35 AM »
Hey Dave, thanks for the web address, I checked it out and it looks pretty good too. Only have one question about the installation, but I'm sure I'll find out the solution. As soon as the Holidays are over and things get back to normal, I'll try one out! Thanks again, tjk
Logged
397 Benji-98\' model    
Marksman  0035, My Fav!,CDT T\'d
Crosman Sierra-Pro,.177
Benji 392 08\'
CDT TT\'d RWS 34 .22,CP 4-16X40 AO
MM T\'d Marksman 0035
Crosman G1 Extreme
Daisy PowerLine 1000
TF-97 .22
B-28A MM T\'d
B-28 OEM Tuned by me
Beeman .22 RX-2 w/Theoben GR
Beeman .177 R1 Santa Rosa

Offline dave2288

  • Hero Member
  • *****
  • Posts: 1031
    • http://
Re: Benji Triggers!!
« Reply #5 on: December 13, 2008, 12:26:45 PM »
no problem!  hope you get her where you want her
Logged
Dave

g1 extreme(turbo tuned cdt trigger, choker muzzle break and fix hinge), powerline 1000s(lube tuned...soon to get a makeover), benjamin ss .22 tuned and shortened, patriot .25(british)
Pages: [1]   Go Up
« previous next »